Respiratory Protection
Showing 1–15 of 27 results
- Respiratory Protection, Safety
3M 1200 Half Face Reusable Respirator
The 3M 1200 Series respirator is a reusable single half facepiece respirator. It is designed to provide purified air to the user in environments containing particulate and/or organic vapor hazard when used with filters and/or cartridges.
The 3M 1200 Series respirator with cartridges and filters meets the requirement of the KMOEL(Korea Ministry of Employment and labor) 2012:83.
Key Features
-Durability: Durable face seal material can withstand repeated donning
and doff for prolonged period
-A great value: Affordable price with quality as a promising member of
the 3M respirator family.
-Single snap-on cartridge: Lightweight, low profile and simple attachment
or detachment in just one step.To be used along with 3M 1700 Filter Holder and 3M 1744 P2 Particulate Filter.
- Respiratory Protection, Safety
3M 2091 P100 Filter
The 3M™ Particulate Filter 2091, P100 helps provide respiratory protection against exposure to lead, asbestos, cadmium, arsenic, and MDA. The filter is effective for concentrations up to 10 times the Permissible Exposure Limit (PEL) with half facepieces, or 50 times PEL with quantitatively fit tested full facepieces. This filter helps protect against a wide range of oil and non-oil based particulate contaminants. 3M’s Advanced Electret Media (AEM) provides a comfortable lightweight, easy-breathing combination. The 2091 is commonly used for welding, brazing, torch cutting, metal pouring and soldering. Inventory needs and training requirements of safety equipment are reduced because this filter works for many different applications. The filter is both flame and water resistant. Industries where this filter is commonly used include agriculture, construction, general manufacturing, pharmaceuticals and primary metals.
- Respiratory Protection, Safety
3M 2097 P100 Filter
The 3M™ Particulate Filter 2097, P100, with Nuisance Level Organic Vapor Relief helps provide respiratory protection against exposure to lead, asbestos, cadmium, arsenic, and MDA. The filter is effective for concentrations up to 10 times the Permissible Exposure Limit (PEL) with half facepieces, or 50 times PEL with quantitatively fit tested full facepieces. This filter helps protect against a wide range of oil and non-oil based particulate contaminants. The filter also offers nuisance level odor relief from organic vapors that are below the PEL. Nuisance level refers to concentrations not exceeding OSHA PEL or other applicable government exposure limits, whichever is lower. Do not use for respiratory protection against organic vapors or in environments that are immediately dangerous to life or health (IDLH). The 2097 is commonly used for welding, brazing, torch cutting, metal pouring and soldering. Inventory needs and training requirements of safety equipment are reduced because this filter works for many different applications. This filter is commonly used in the following industries: agriculture, construction, general manufacturing, pharmaceuticals, primary metals.
- Respiratory Protection, Safety
3M 3200 Reusable Half Face Respirator
Features include: An elastomeric face seal, M/L in size, it is a compact and lightweight half mask that offers an economical solution for a range of applications.This half face piece reusable respirator offers reliable and convenient respiratory protection and is suitable for many situations, helping provide protection against particulates and certain gases and vapors.
- Low profile design allows a wide field of vision
- Lightweight makes long period of wear bearable
- Soft, elastomeric face-fit secures a lasting comfort
- Unique easy to don/doff strap system
- Respiratory Protection, Safety
3M 3301K-55 Organic Vapor Cartridge
The 3M™ 3301K-55 Single Cartridges are designed to help protect workers from organic vapors. Use with half face piece cartridges 1200, 3200, and HF-52 series.
This is the lowest concentration organic compound canister and can be used in combination with the other type of monohedron.
- China SAWS (State Administration of Work Safety), JMHLW (Japanese Ministry of Health, Labor, and Welfare), and KMOEL (Korea Ministry of Employment and Labor) certified
- Simple installation and usage requirements reduces training requirements
- Wide range of applications reduces inventory needs
- High pressure
- Respiratory Protection, Safety
3M 501 Dust Prefilter Retainer
Used to hold 3M™ Particulate Filters 5N11 and 5P71/07194(AAD) in place on top of 3M™ Respirators 5000 Series and 3M™ Cartridges 6000 Series and 3M™ Filter Adapter 603.
The 3M™ Filter Retainer 501, Respiratory Protection System Component holds 3M™ Particulate Filters 5N11 and 5P71/07194 (AAD) in place on top of 3M™ Respirators 5000 Series, 3M™ Cartridges 6000 Series and 3M™ Filter Adapter 603 (all respirators, filters, cartridges, and adapters sold separately).
- Respiratory Protection, Safety
3M 6001 Organic Vapour Cartridge
The 3M™ Organic Vapor Cartridge 6001 helps provide organic vapor protection in a variety of environments. The cartridge may be used for vapor concentrations up to 10 times the Permissible Exposure Limit (PEL) with half facepieces or 50 times PEL with quantitatively fit tested full facepieces. Recommended applications for the cartridge include assembly and mechanical, batch-charging, change-overs, chemical dispensing, clean-up, cleaning, painting, parts cleaning, and seal coating. Inventory needs and training requirements for safety equipment are reduced because this respirator cartridge selection works for many different applications. Industries in which this cartridge is commonly used include chemicals, construction, oil and gas, and transportation.
This organic vapor cartridge works with 3M™ Half and Full Facepieces 6000, 7000 and FF-400 Series with bayonet holders. The cartridge is NIOSH (National Institute for Occupational Safety and Health) approved for environments containing certain organic vapors. The cartridge has been assigned the color code “black” in the NIOSH system.
Breathing organic vapors can pose a risk to your health. NIOSH, a Federal government regulatory agency, has tested and approved the 3M™ Organic Vapor Cartridge 6001 to help reduce exposure to certain organic vapors.
- Respiratory Protection, Safety
3M 6003 Acid Gas Cartridge
The 3M™ Organic Vapor/Acid Gas Cartridge 6003 helps provide organic vapor and acid gas protection in a variety of environments. When properly used with an approved 3M respirator properly fitted, this respirator cartridge helps provide respiratory protection from certain organic vapors, chlorine, hydrogen chloride, sulfur dioxide, chlorine dioxide, hydrogen sulfide, or hydrogen fluoride. The cartridge may be used for vapor concentrations up to 10 times the Permissible Exposure Limit (PEL) with half facepieces or 50 times PEL with quantitatively fit tested full facepieces. Recommended applications for the cartridge include assembly and mechanical, batch-charging, change-overs, chemical dispensing, clean-up, cleaning, handling, painting, parts cleaning, pesticide application, powder, and seal coating. Inventory needs and training requirements for safety equipment are reduced because this respirator cartridge selection works for many different applications. This cartridge is commonly used in the following industries: agriculture, aluminum reduction, chemical manufacturing, laboratories, petrochemical, pharmaceuticals, pulp and paper, and utilities.
This organic vapor and acid gas cartridge works with 3M™ Half and Full Facepieces 6000, 7000 and FF-400 Series with bayonet holders. The cartridge is NIOSH (National Institute for Occupational Safety and Health) approved for environments containing certain organic vapors and acid gases. This cartridge is not for use in environments that are immediately dangerous to life or health (IDLH). The cartridge has been assigned the color code “Yellow” in the NIOSH system.
- Respiratory Protection, Safety
3M 6200 Half Facepiece Reusable Respirator
The 3M™ Half Facepiece Reusable Respirator 6000 Series helps provide protection against particulates and a wide variety of gases and vapors when used with approved cartridges and filters. When properly fitted and used with approved 3M™ cartridges and filters, this respirator helps provide protection at concentrations up to 10 times the Permissible Exposure Limit (PEL). The swept back design of the cartridges helps improve balance and visibility. Remarkably comfortable, soft, lightweight facepiece has easy-to-adjust head straps allow for a customized fit to the user. Replaceable cartridges help reduce waste and costs over time.
- Respiratory Protection, Safety
3M 6800 Respirator
The 3M™ Full Facepiece Reusable Respirator 6000 Series helps provide protection against certain airborne contaminants. Versatile—use with 3M particulate filters, gas/vapor cartridges and supplied air respirator systems. The 3M™ Cool Flow ™ Valve helps make breathing easier. These features combine to make a comfortable, practical and economical solution. Recommended applications include assembly , chemical clean-up, chemical handling, chemical splash, chipping, chiseling, cleaning, furnace operations, grinding, laboratories, machining, masonry, painting, pouring/casting, sanding, sawing, and welding. Industries in which this facepiece are commonly used include agriculture, construction, general manufacturing, pharmaceuticals, and primary metals.
- Face Protection, Respiratory Protection, Safety
3M 783520 Speedglas Welding Helmet
Designed for use in many of the most popular safety helmets in the industry. With the quick opening rail installed, it is possible to easily release the viewfinder without removing the safety helmet while welding is not carried out.
- Respiratory Protection, Safety
3M 8210 N95 Respirator
3M™ Particulate Respirator 8210, N95 is a disposable particulate respirator that is designed to help provide reliable respiratory protection of at least 95 percent filtration efficiency against certain non-oil based particles. This respirator is designed for use for particles such as those from grinding, sanding, sweeping, sawing, bagging, or other dusty operations. This respirator can also help reduce inhalation exposures to certain airborne biological particles (examples: mold, Bacillus anthracis, Mycobacterium tuberculosis), but cannot eliminate the risk of contracting infection, illness, or disease. The respirator incorporates 3M’s proprietary technology with advanced electrostatically charged microfiber filter media designed for ease of breathing. This respirator is compatible with a variety of protective eyewear and hearing protection.
- Respiratory Protection, Safety
3M 8211 N95 Respirator
3M™ Particulate Respirator 8211, N95 is a disposable particulate respirator that is designed to help provide reliable respiratory protection of at least 95 percent filtration efficiency against certain non-oil based particles. The respirator is designed for use for particles such as those from grinding, sanding, sweeping, sawing, bagging, or other dusty operations. A foam faceseal and soft inner material provide added comfort while the cup shape design makes the respirator spacious and durable. Braided headbands and an adjustable M-Noseclip adjusts easily for fewer pressure points and greater comfort. The respirator incorporates 3M’s proprietary technology with advanced electrostatically charged microfiber filter media designed for ease of breathing. This respirator is compatible with a variety of protective eyewear and hearing protection. Fitted with a 3M Cool Flow™ Exhalation Valve, this respirator is ideally suited for work situations involving heat, humidity, or long periods of wear. The proprietary 3M Cool Flow valve is designed to release hot, humid exhaled breath quickly, helping to prevent an unpleasant build up of heat inside the facepiece – a significant cause of discomfort to respirator wearers.
- Respiratory Protection, Safety
3M 8511 N95 Respirator
3M™ Particulate Respirator 8511, N95 is a disposable particulate respirator that is designed to help provide reliable respiratory protection of at least 95 percent filtration efficiency against certain non-oil based particles. The respirator is designed for use for particles such as those from grinding, sanding, sweeping, sawing, bagging, or other dusty operations. This respirator can also help reduce inhalation exposures to certain airborne biological particles (examples: mold, Bacillus anthracis, Mycobacterium tuberculosis), but cannot eliminate the risk of contracting infection, illness, or disease. Soft inner material provides added comfort while the cup shape design makes the respirator spacious and durable. Braided headbands and an adjustable M-noseclip helps provide a custom and secure seal. The respirator incorporates 3M’s proprietary technology with advanced electrostatically charged microfiber filter media designed for ease of breathing. This respirator is compatible with a variety of protective eyewear and hearing protection. Fitted with a 3M Cool Flow™ Exhalation Valve, this respirator is ideally suited for work situations involving heat, humidity, or long periods of wear. The proprietary 3M Cool Flow valve is designed to release hot, humid exhaled breath quickly, helping to prevent an unpleasant build up of heat inside the facepiece – a significant cause of discomfort to respirator wearers. The Cool Flow valve’s efficiency in keeping breathing cool and comfortable has been demonstrated through testing*: the atmosphere inside a respirator with a Cool Flow valve is on average 7.5°F cooler than the similar product without the valve. This makes Cool Flow valve respirators ideal for long periods of wear, especially where conditions are hot, humid or physically demanding.
- Respiratory Protection, Safety
3M 9000ING Respirator
Lightweight, foldable and designed to protect you from pollutants and dust, the lightweight 3M respirator uses a variety of innovative features to help you meet your respiratory protection and comfort needs. By incorporating 3M’s proprietary technology – the electrostatically charged microfiber filter media. These highly charged microfibres greatly enhance the capture of airborne particles.It’s adjustable noseclip help provide a custom fit with secure seal and reduces potential for eyewear fogging. The 2 strap design provides a secure fit. The masks are foldable and easy to carry as well.
- Respiratory Protection, Safety
3M 1200 Half Face Reusable Respirator
The 3M 1200 Series respirator is a reusable single half facepiece respirator. It is designed to provide purified air to the user in environments containing particulate and/or organic vapor hazard when used with filters and/or cartridges.
The 3M 1200 Series respirator with cartridges and filters meets the requirement of the KMOEL(Korea Ministry of Employment and labor) 2012:83.
Key Features
-Durability: Durable face seal material can withstand repeated donning
and doff for prolonged period
-A great value: Affordable price with quality as a promising member of
the 3M respirator family.
-Single snap-on cartridge: Lightweight, low profile and simple attachment
or detachment in just one step.To be used along with 3M 1700 Filter Holder and 3M 1744 P2 Particulate Filter.
- Respiratory Protection, Safety
3M 2091 P100 Filter
The 3M™ Particulate Filter 2091, P100 helps provide respiratory protection against exposure to lead, asbestos, cadmium, arsenic, and MDA. The filter is effective for concentrations up to 10 times the Permissible Exposure Limit (PEL) with half facepieces, or 50 times PEL with quantitatively fit tested full facepieces. This filter helps protect against a wide range of oil and non-oil based particulate contaminants. 3M’s Advanced Electret Media (AEM) provides a comfortable lightweight, easy-breathing combination. The 2091 is commonly used for welding, brazing, torch cutting, metal pouring and soldering. Inventory needs and training requirements of safety equipment are reduced because this filter works for many different applications. The filter is both flame and water resistant. Industries where this filter is commonly used include agriculture, construction, general manufacturing, pharmaceuticals and primary metals.
- Respiratory Protection, Safety
3M 2097 P100 Filter
The 3M™ Particulate Filter 2097, P100, with Nuisance Level Organic Vapor Relief helps provide respiratory protection against exposure to lead, asbestos, cadmium, arsenic, and MDA. The filter is effective for concentrations up to 10 times the Permissible Exposure Limit (PEL) with half facepieces, or 50 times PEL with quantitatively fit tested full facepieces. This filter helps protect against a wide range of oil and non-oil based particulate contaminants. The filter also offers nuisance level odor relief from organic vapors that are below the PEL. Nuisance level refers to concentrations not exceeding OSHA PEL or other applicable government exposure limits, whichever is lower. Do not use for respiratory protection against organic vapors or in environments that are immediately dangerous to life or health (IDLH). The 2097 is commonly used for welding, brazing, torch cutting, metal pouring and soldering. Inventory needs and training requirements of safety equipment are reduced because this filter works for many different applications. This filter is commonly used in the following industries: agriculture, construction, general manufacturing, pharmaceuticals, primary metals.
- Respiratory Protection, Safety
3M 3200 Reusable Half Face Respirator
Features include: An elastomeric face seal, M/L in size, it is a compact and lightweight half mask that offers an economical solution for a range of applications.This half face piece reusable respirator offers reliable and convenient respiratory protection and is suitable for many situations, helping provide protection against particulates and certain gases and vapors.
- Low profile design allows a wide field of vision
- Lightweight makes long period of wear bearable
- Soft, elastomeric face-fit secures a lasting comfort
- Unique easy to don/doff strap system
- Respiratory Protection, Safety
3M 3301K-55 Organic Vapor Cartridge
The 3M™ 3301K-55 Single Cartridges are designed to help protect workers from organic vapors. Use with half face piece cartridges 1200, 3200, and HF-52 series.
This is the lowest concentration organic compound canister and can be used in combination with the other type of monohedron.
- China SAWS (State Administration of Work Safety), JMHLW (Japanese Ministry of Health, Labor, and Welfare), and KMOEL (Korea Ministry of Employment and Labor) certified
- Simple installation and usage requirements reduces training requirements
- Wide range of applications reduces inventory needs
- High pressure
- Respiratory Protection, Safety
3M 501 Dust Prefilter Retainer
Used to hold 3M™ Particulate Filters 5N11 and 5P71/07194(AAD) in place on top of 3M™ Respirators 5000 Series and 3M™ Cartridges 6000 Series and 3M™ Filter Adapter 603.
The 3M™ Filter Retainer 501, Respiratory Protection System Component holds 3M™ Particulate Filters 5N11 and 5P71/07194 (AAD) in place on top of 3M™ Respirators 5000 Series, 3M™ Cartridges 6000 Series and 3M™ Filter Adapter 603 (all respirators, filters, cartridges, and adapters sold separately).
- Respiratory Protection, Safety
3M 6001 Organic Vapour Cartridge
The 3M™ Organic Vapor Cartridge 6001 helps provide organic vapor protection in a variety of environments. The cartridge may be used for vapor concentrations up to 10 times the Permissible Exposure Limit (PEL) with half facepieces or 50 times PEL with quantitatively fit tested full facepieces. Recommended applications for the cartridge include assembly and mechanical, batch-charging, change-overs, chemical dispensing, clean-up, cleaning, painting, parts cleaning, and seal coating. Inventory needs and training requirements for safety equipment are reduced because this respirator cartridge selection works for many different applications. Industries in which this cartridge is commonly used include chemicals, construction, oil and gas, and transportation.
This organic vapor cartridge works with 3M™ Half and Full Facepieces 6000, 7000 and FF-400 Series with bayonet holders. The cartridge is NIOSH (National Institute for Occupational Safety and Health) approved for environments containing certain organic vapors. The cartridge has been assigned the color code “black” in the NIOSH system.
Breathing organic vapors can pose a risk to your health. NIOSH, a Federal government regulatory agency, has tested and approved the 3M™ Organic Vapor Cartridge 6001 to help reduce exposure to certain organic vapors.
- Respiratory Protection, Safety
3M 6003 Acid Gas Cartridge
The 3M™ Organic Vapor/Acid Gas Cartridge 6003 helps provide organic vapor and acid gas protection in a variety of environments. When properly used with an approved 3M respirator properly fitted, this respirator cartridge helps provide respiratory protection from certain organic vapors, chlorine, hydrogen chloride, sulfur dioxide, chlorine dioxide, hydrogen sulfide, or hydrogen fluoride. The cartridge may be used for vapor concentrations up to 10 times the Permissible Exposure Limit (PEL) with half facepieces or 50 times PEL with quantitatively fit tested full facepieces. Recommended applications for the cartridge include assembly and mechanical, batch-charging, change-overs, chemical dispensing, clean-up, cleaning, handling, painting, parts cleaning, pesticide application, powder, and seal coating. Inventory needs and training requirements for safety equipment are reduced because this respirator cartridge selection works for many different applications. This cartridge is commonly used in the following industries: agriculture, aluminum reduction, chemical manufacturing, laboratories, petrochemical, pharmaceuticals, pulp and paper, and utilities.
This organic vapor and acid gas cartridge works with 3M™ Half and Full Facepieces 6000, 7000 and FF-400 Series with bayonet holders. The cartridge is NIOSH (National Institute for Occupational Safety and Health) approved for environments containing certain organic vapors and acid gases. This cartridge is not for use in environments that are immediately dangerous to life or health (IDLH). The cartridge has been assigned the color code “Yellow” in the NIOSH system.
- Respiratory Protection, Safety
3M 6200 Half Facepiece Reusable Respirator
The 3M™ Half Facepiece Reusable Respirator 6000 Series helps provide protection against particulates and a wide variety of gases and vapors when used with approved cartridges and filters. When properly fitted and used with approved 3M™ cartridges and filters, this respirator helps provide protection at concentrations up to 10 times the Permissible Exposure Limit (PEL). The swept back design of the cartridges helps improve balance and visibility. Remarkably comfortable, soft, lightweight facepiece has easy-to-adjust head straps allow for a customized fit to the user. Replaceable cartridges help reduce waste and costs over time.
- Respiratory Protection, Safety
3M 6800 Respirator
The 3M™ Full Facepiece Reusable Respirator 6000 Series helps provide protection against certain airborne contaminants. Versatile—use with 3M particulate filters, gas/vapor cartridges and supplied air respirator systems. The 3M™ Cool Flow ™ Valve helps make breathing easier. These features combine to make a comfortable, practical and economical solution. Recommended applications include assembly , chemical clean-up, chemical handling, chemical splash, chipping, chiseling, cleaning, furnace operations, grinding, laboratories, machining, masonry, painting, pouring/casting, sanding, sawing, and welding. Industries in which this facepiece are commonly used include agriculture, construction, general manufacturing, pharmaceuticals, and primary metals.
- Face Protection, Respiratory Protection, Safety
3M 783520 Speedglas Welding Helmet
Designed for use in many of the most popular safety helmets in the industry. With the quick opening rail installed, it is possible to easily release the viewfinder without removing the safety helmet while welding is not carried out.
- Respiratory Protection, Safety
3M 8210 N95 Respirator
3M™ Particulate Respirator 8210, N95 is a disposable particulate respirator that is designed to help provide reliable respiratory protection of at least 95 percent filtration efficiency against certain non-oil based particles. This respirator is designed for use for particles such as those from grinding, sanding, sweeping, sawing, bagging, or other dusty operations. This respirator can also help reduce inhalation exposures to certain airborne biological particles (examples: mold, Bacillus anthracis, Mycobacterium tuberculosis), but cannot eliminate the risk of contracting infection, illness, or disease. The respirator incorporates 3M’s proprietary technology with advanced electrostatically charged microfiber filter media designed for ease of breathing. This respirator is compatible with a variety of protective eyewear and hearing protection.
- Respiratory Protection, Safety
3M 8211 N95 Respirator
3M™ Particulate Respirator 8211, N95 is a disposable particulate respirator that is designed to help provide reliable respiratory protection of at least 95 percent filtration efficiency against certain non-oil based particles. The respirator is designed for use for particles such as those from grinding, sanding, sweeping, sawing, bagging, or other dusty operations. A foam faceseal and soft inner material provide added comfort while the cup shape design makes the respirator spacious and durable. Braided headbands and an adjustable M-Noseclip adjusts easily for fewer pressure points and greater comfort. The respirator incorporates 3M’s proprietary technology with advanced electrostatically charged microfiber filter media designed for ease of breathing. This respirator is compatible with a variety of protective eyewear and hearing protection. Fitted with a 3M Cool Flow™ Exhalation Valve, this respirator is ideally suited for work situations involving heat, humidity, or long periods of wear. The proprietary 3M Cool Flow valve is designed to release hot, humid exhaled breath quickly, helping to prevent an unpleasant build up of heat inside the facepiece – a significant cause of discomfort to respirator wearers.
- Respiratory Protection, Safety
3M 8511 N95 Respirator
3M™ Particulate Respirator 8511, N95 is a disposable particulate respirator that is designed to help provide reliable respiratory protection of at least 95 percent filtration efficiency against certain non-oil based particles. The respirator is designed for use for particles such as those from grinding, sanding, sweeping, sawing, bagging, or other dusty operations. This respirator can also help reduce inhalation exposures to certain airborne biological particles (examples: mold, Bacillus anthracis, Mycobacterium tuberculosis), but cannot eliminate the risk of contracting infection, illness, or disease. Soft inner material provides added comfort while the cup shape design makes the respirator spacious and durable. Braided headbands and an adjustable M-noseclip helps provide a custom and secure seal. The respirator incorporates 3M’s proprietary technology with advanced electrostatically charged microfiber filter media designed for ease of breathing. This respirator is compatible with a variety of protective eyewear and hearing protection. Fitted with a 3M Cool Flow™ Exhalation Valve, this respirator is ideally suited for work situations involving heat, humidity, or long periods of wear. The proprietary 3M Cool Flow valve is designed to release hot, humid exhaled breath quickly, helping to prevent an unpleasant build up of heat inside the facepiece – a significant cause of discomfort to respirator wearers. The Cool Flow valve’s efficiency in keeping breathing cool and comfortable has been demonstrated through testing*: the atmosphere inside a respirator with a Cool Flow valve is on average 7.5°F cooler than the similar product without the valve. This makes Cool Flow valve respirators ideal for long periods of wear, especially where conditions are hot, humid or physically demanding.
- Respiratory Protection, Safety
3M 9000ING Respirator
Lightweight, foldable and designed to protect you from pollutants and dust, the lightweight 3M respirator uses a variety of innovative features to help you meet your respiratory protection and comfort needs. By incorporating 3M’s proprietary technology – the electrostatically charged microfiber filter media. These highly charged microfibres greatly enhance the capture of airborne particles.It’s adjustable noseclip help provide a custom fit with secure seal and reduces potential for eyewear fogging. The 2 strap design provides a secure fit. The masks are foldable and easy to carry as well.
- Respiratory Protection, Safety
3M 1200 Half Face Reusable Respirator
The 3M 1200 Series respirator is a reusable single half facepiece respirator. It is designed to provide purified air to the user in environments containing particulate and/or organic vapor hazard when used with filters and/or cartridges.
The 3M 1200 Series respirator with cartridges and filters meets the requirement of the KMOEL(Korea Ministry of Employment and labor) 2012:83.
Key Features
-Durability: Durable face seal material can withstand repeated donning
and doff for prolonged period
-A great value: Affordable price with quality as a promising member of
the 3M respirator family.
-Single snap-on cartridge: Lightweight, low profile and simple attachment
or detachment in just one step.To be used along with 3M 1700 Filter Holder and 3M 1744 P2 Particulate Filter.
- Respiratory Protection, Safety
3M 2091 P100 Filter
The 3M™ Particulate Filter 2091, P100 helps provide respiratory protection against exposure to lead, asbestos, cadmium, arsenic, and MDA. The filter is effective for concentrations up to 10 times the Permissible Exposure Limit (PEL) with half facepieces, or 50 times PEL with quantitatively fit tested full facepieces. This filter helps protect against a wide range of oil and non-oil based particulate contaminants. 3M’s Advanced Electret Media (AEM) provides a comfortable lightweight, easy-breathing combination. The 2091 is commonly used for welding, brazing, torch cutting, metal pouring and soldering. Inventory needs and training requirements of safety equipment are reduced because this filter works for many different applications. The filter is both flame and water resistant. Industries where this filter is commonly used include agriculture, construction, general manufacturing, pharmaceuticals and primary metals.
- Respiratory Protection, Safety
3M 2097 P100 Filter
The 3M™ Particulate Filter 2097, P100, with Nuisance Level Organic Vapor Relief helps provide respiratory protection against exposure to lead, asbestos, cadmium, arsenic, and MDA. The filter is effective for concentrations up to 10 times the Permissible Exposure Limit (PEL) with half facepieces, or 50 times PEL with quantitatively fit tested full facepieces. This filter helps protect against a wide range of oil and non-oil based particulate contaminants. The filter also offers nuisance level odor relief from organic vapors that are below the PEL. Nuisance level refers to concentrations not exceeding OSHA PEL or other applicable government exposure limits, whichever is lower. Do not use for respiratory protection against organic vapors or in environments that are immediately dangerous to life or health (IDLH). The 2097 is commonly used for welding, brazing, torch cutting, metal pouring and soldering. Inventory needs and training requirements of safety equipment are reduced because this filter works for many different applications. This filter is commonly used in the following industries: agriculture, construction, general manufacturing, pharmaceuticals, primary metals.
- Respiratory Protection, Safety
3M 3200 Reusable Half Face Respirator
Features include: An elastomeric face seal, M/L in size, it is a compact and lightweight half mask that offers an economical solution for a range of applications.This half face piece reusable respirator offers reliable and convenient respiratory protection and is suitable for many situations, helping provide protection against particulates and certain gases and vapors.
- Low profile design allows a wide field of vision
- Lightweight makes long period of wear bearable
- Soft, elastomeric face-fit secures a lasting comfort
- Unique easy to don/doff strap system
- Respiratory Protection, Safety
3M 3301K-55 Organic Vapor Cartridge
The 3M™ 3301K-55 Single Cartridges are designed to help protect workers from organic vapors. Use with half face piece cartridges 1200, 3200, and HF-52 series.
This is the lowest concentration organic compound canister and can be used in combination with the other type of monohedron.
- China SAWS (State Administration of Work Safety), JMHLW (Japanese Ministry of Health, Labor, and Welfare), and KMOEL (Korea Ministry of Employment and Labor) certified
- Simple installation and usage requirements reduces training requirements
- Wide range of applications reduces inventory needs
- High pressure
- Respiratory Protection, Safety
3M 501 Dust Prefilter Retainer
Used to hold 3M™ Particulate Filters 5N11 and 5P71/07194(AAD) in place on top of 3M™ Respirators 5000 Series and 3M™ Cartridges 6000 Series and 3M™ Filter Adapter 603.
The 3M™ Filter Retainer 501, Respiratory Protection System Component holds 3M™ Particulate Filters 5N11 and 5P71/07194 (AAD) in place on top of 3M™ Respirators 5000 Series, 3M™ Cartridges 6000 Series and 3M™ Filter Adapter 603 (all respirators, filters, cartridges, and adapters sold separately).
- Respiratory Protection, Safety
3M 6001 Organic Vapour Cartridge
The 3M™ Organic Vapor Cartridge 6001 helps provide organic vapor protection in a variety of environments. The cartridge may be used for vapor concentrations up to 10 times the Permissible Exposure Limit (PEL) with half facepieces or 50 times PEL with quantitatively fit tested full facepieces. Recommended applications for the cartridge include assembly and mechanical, batch-charging, change-overs, chemical dispensing, clean-up, cleaning, painting, parts cleaning, and seal coating. Inventory needs and training requirements for safety equipment are reduced because this respirator cartridge selection works for many different applications. Industries in which this cartridge is commonly used include chemicals, construction, oil and gas, and transportation.
This organic vapor cartridge works with 3M™ Half and Full Facepieces 6000, 7000 and FF-400 Series with bayonet holders. The cartridge is NIOSH (National Institute for Occupational Safety and Health) approved for environments containing certain organic vapors. The cartridge has been assigned the color code “black” in the NIOSH system.
Breathing organic vapors can pose a risk to your health. NIOSH, a Federal government regulatory agency, has tested and approved the 3M™ Organic Vapor Cartridge 6001 to help reduce exposure to certain organic vapors.
- Respiratory Protection, Safety
3M 6003 Acid Gas Cartridge
The 3M™ Organic Vapor/Acid Gas Cartridge 6003 helps provide organic vapor and acid gas protection in a variety of environments. When properly used with an approved 3M respirator properly fitted, this respirator cartridge helps provide respiratory protection from certain organic vapors, chlorine, hydrogen chloride, sulfur dioxide, chlorine dioxide, hydrogen sulfide, or hydrogen fluoride. The cartridge may be used for vapor concentrations up to 10 times the Permissible Exposure Limit (PEL) with half facepieces or 50 times PEL with quantitatively fit tested full facepieces. Recommended applications for the cartridge include assembly and mechanical, batch-charging, change-overs, chemical dispensing, clean-up, cleaning, handling, painting, parts cleaning, pesticide application, powder, and seal coating. Inventory needs and training requirements for safety equipment are reduced because this respirator cartridge selection works for many different applications. This cartridge is commonly used in the following industries: agriculture, aluminum reduction, chemical manufacturing, laboratories, petrochemical, pharmaceuticals, pulp and paper, and utilities.
This organic vapor and acid gas cartridge works with 3M™ Half and Full Facepieces 6000, 7000 and FF-400 Series with bayonet holders. The cartridge is NIOSH (National Institute for Occupational Safety and Health) approved for environments containing certain organic vapors and acid gases. This cartridge is not for use in environments that are immediately dangerous to life or health (IDLH). The cartridge has been assigned the color code “Yellow” in the NIOSH system.
- Respiratory Protection, Safety
3M 6200 Half Facepiece Reusable Respirator
The 3M™ Half Facepiece Reusable Respirator 6000 Series helps provide protection against particulates and a wide variety of gases and vapors when used with approved cartridges and filters. When properly fitted and used with approved 3M™ cartridges and filters, this respirator helps provide protection at concentrations up to 10 times the Permissible Exposure Limit (PEL). The swept back design of the cartridges helps improve balance and visibility. Remarkably comfortable, soft, lightweight facepiece has easy-to-adjust head straps allow for a customized fit to the user. Replaceable cartridges help reduce waste and costs over time.
- Respiratory Protection, Safety
3M 6800 Respirator
The 3M™ Full Facepiece Reusable Respirator 6000 Series helps provide protection against certain airborne contaminants. Versatile—use with 3M particulate filters, gas/vapor cartridges and supplied air respirator systems. The 3M™ Cool Flow ™ Valve helps make breathing easier. These features combine to make a comfortable, practical and economical solution. Recommended applications include assembly , chemical clean-up, chemical handling, chemical splash, chipping, chiseling, cleaning, furnace operations, grinding, laboratories, machining, masonry, painting, pouring/casting, sanding, sawing, and welding. Industries in which this facepiece are commonly used include agriculture, construction, general manufacturing, pharmaceuticals, and primary metals.
- Face Protection, Respiratory Protection, Safety
3M 783520 Speedglas Welding Helmet
Designed for use in many of the most popular safety helmets in the industry. With the quick opening rail installed, it is possible to easily release the viewfinder without removing the safety helmet while welding is not carried out.
- Respiratory Protection, Safety
3M 8210 N95 Respirator
3M™ Particulate Respirator 8210, N95 is a disposable particulate respirator that is designed to help provide reliable respiratory protection of at least 95 percent filtration efficiency against certain non-oil based particles. This respirator is designed for use for particles such as those from grinding, sanding, sweeping, sawing, bagging, or other dusty operations. This respirator can also help reduce inhalation exposures to certain airborne biological particles (examples: mold, Bacillus anthracis, Mycobacterium tuberculosis), but cannot eliminate the risk of contracting infection, illness, or disease. The respirator incorporates 3M’s proprietary technology with advanced electrostatically charged microfiber filter media designed for ease of breathing. This respirator is compatible with a variety of protective eyewear and hearing protection.
- Respiratory Protection, Safety
3M 8211 N95 Respirator
3M™ Particulate Respirator 8211, N95 is a disposable particulate respirator that is designed to help provide reliable respiratory protection of at least 95 percent filtration efficiency against certain non-oil based particles. The respirator is designed for use for particles such as those from grinding, sanding, sweeping, sawing, bagging, or other dusty operations. A foam faceseal and soft inner material provide added comfort while the cup shape design makes the respirator spacious and durable. Braided headbands and an adjustable M-Noseclip adjusts easily for fewer pressure points and greater comfort. The respirator incorporates 3M’s proprietary technology with advanced electrostatically charged microfiber filter media designed for ease of breathing. This respirator is compatible with a variety of protective eyewear and hearing protection. Fitted with a 3M Cool Flow™ Exhalation Valve, this respirator is ideally suited for work situations involving heat, humidity, or long periods of wear. The proprietary 3M Cool Flow valve is designed to release hot, humid exhaled breath quickly, helping to prevent an unpleasant build up of heat inside the facepiece – a significant cause of discomfort to respirator wearers.
- Respiratory Protection, Safety
3M 8511 N95 Respirator
3M™ Particulate Respirator 8511, N95 is a disposable particulate respirator that is designed to help provide reliable respiratory protection of at least 95 percent filtration efficiency against certain non-oil based particles. The respirator is designed for use for particles such as those from grinding, sanding, sweeping, sawing, bagging, or other dusty operations. This respirator can also help reduce inhalation exposures to certain airborne biological particles (examples: mold, Bacillus anthracis, Mycobacterium tuberculosis), but cannot eliminate the risk of contracting infection, illness, or disease. Soft inner material provides added comfort while the cup shape design makes the respirator spacious and durable. Braided headbands and an adjustable M-noseclip helps provide a custom and secure seal. The respirator incorporates 3M’s proprietary technology with advanced electrostatically charged microfiber filter media designed for ease of breathing. This respirator is compatible with a variety of protective eyewear and hearing protection. Fitted with a 3M Cool Flow™ Exhalation Valve, this respirator is ideally suited for work situations involving heat, humidity, or long periods of wear. The proprietary 3M Cool Flow valve is designed to release hot, humid exhaled breath quickly, helping to prevent an unpleasant build up of heat inside the facepiece – a significant cause of discomfort to respirator wearers. The Cool Flow valve’s efficiency in keeping breathing cool and comfortable has been demonstrated through testing*: the atmosphere inside a respirator with a Cool Flow valve is on average 7.5°F cooler than the similar product without the valve. This makes Cool Flow valve respirators ideal for long periods of wear, especially where conditions are hot, humid or physically demanding.
- Respiratory Protection, Safety
3M 9000ING Respirator
Lightweight, foldable and designed to protect you from pollutants and dust, the lightweight 3M respirator uses a variety of innovative features to help you meet your respiratory protection and comfort needs. By incorporating 3M’s proprietary technology – the electrostatically charged microfiber filter media. These highly charged microfibres greatly enhance the capture of airborne particles.It’s adjustable noseclip help provide a custom fit with secure seal and reduces potential for eyewear fogging. The 2 strap design provides a secure fit. The masks are foldable and easy to carry as well.