Efficient Solutions for all Machining Operations
Metal Working
Showing 1–15 of 22 results
- Lubricants, Metal Working
CRC SUPER TAPPING FLUID II
0 out of 5(0)CRC Super Tapping Fluid II is a blend of highly refined base oils and synthetic additives, designed to meet the most stringent requirements for all machining operations on both ferrous and non-ferrous metals (tough alloys, stainless steel, nickel alloys, aluminum, brass). The additives create a strong film that can withstand extreme pressure to increase tool life and ease tapping.
- Lubricants, Metal Working
Fuchs Ecocool 600 NBF C
0 out of 5(0)Water Miscible Semi-synthetic Coolant for Medium Machinability
ECOCOOL 600 NBF C is a low-mineral oil contained, water-miscible semi-synthetic cutting fluid which is specially designed for multi-purpose machining applications on cast iron, carbon steel and ferrous alloys. It will form a long-life, stable and finely dispersed clear translucent emulsion when mixed with water. ECOCOOL 600 NBF C is free of nitrite, chlorine and phenols. ECOCOOL 600 NBF C is recommended for drilling, milling, reaming, tapping, boring, and grinding operations.
- Metal Working
FUCHS Ecocool 705-I
0 out of 5(0)ECOCOOL 705-I is a unique cutting fluid designed to meet the increasing demands on Aluminium Industry. Especially well suited to applications where clarity and foam control are critical, forming a opaque solution in water, free from chlorine, nitrites and phenols. suitable for the machining of Aluminium from general to difficult machining applications where water soluble cutting fluid is required.
- Lubricants, Metal Working
Fuchs Ecocool Soluble 30*
0 out of 5(0)ECOCOOL SOLUBLE 30* is a low mineral oil, water- miscible coolant designed for grinding and light
machining of steel. ECOCOOL SOLUBLE 30* produces a long-life, stable and finely dispersed beige opalescent emulsion when mixed with water. ECOCOOL SOLUBLE 30* is free of Nitrite and PTBBA and contains no substances designated as hazardous. ECOCOOL SOLUBLE 30* is recommended for all grinding, drilling and milling operations on steel. - Metal Working
FUCHS ECOCUT 715
0 out of 5(0)ECOCUT 715 is a low misting, neat cutting oil containing a high percentage of chlorine-free EP combination and polar lubricity improvers. The use of a special base and selected additive packages in ECOCUT 715 significantly reduces oil mist formation in comparison to conventional cutting oils.
- Metal Working
FUCHS Ecocut HFN 10 LE
0 out of 5(0)The Ecocut HFN LE series of products are designed as multipurpose oils for cutting, grinding and especially the low viscosity grades-for honing operations with the bonus of being rationalization products for hydraulic systems of spindle oil applications. All Ecocut HFN LE oils are recommended for normal to difficult machining operations on cast iron, steel and nonferrous metals. The optimized heat transfer properties permit higher feed and cutting speeds. The abbreviation LE means “ Low evaporation” and stands for excellent anti-mist properties and low evaporation during use. Such oils contribute towards reducing environmental and workshop pollution.
- Metal Working
FUCHS ECOCUT HFN 16
0 out of 5(0)The Ecocut HFN LE series of products are designed as multipurpose oils for cutting, grinding and especially the low viscosity grades-for honing operations with the bonus of being rationalization products for hydraulic systems of spindle oil applications. All Ecocut HFN LE oils are recommended for normal to difficult machining operations on cast iron, steel and nonferrous metals. The optimized heat transfer properties permit higher feed and cutting speeds. The abbreviation LE means “ Low evaporation” and stands for excellent anti-mist properties and low evaporation during use. Such oils contribute towards reducing environmental and workshop pollution.
- Metal Working
FUCHS ECOCUT HFN 16 LE
0 out of 5(0)The ECOCUT HFN LE series of products are designed as multipurpose oils for cutting, grinding and especially the low viscosity grades-for honing operations with the bonus of being rationalization products for hydraulic systems of spindle oil applications. All ECOCUT HFN LE oils are recommended for normal to difficult machining operations on cast iron, steel and nonferrous metals. The optimized heat transfer properties permit higher feed and cutting speeds. The abbreviation LE means “Low evaporation” and stands for excellent anti-mist properties and low evaporation during use. Such oils contribute towards reducing environmental and workshop pollution.
- Metal Working
FUCHS ECOCUT HFN 5 LE
0 out of 5(0)The ECOCUT HFN LE series of products are designed as multipurpose oils for cutting, grinding and especially the low viscosity grades-for honing operations with the bonus of being rationalization products for hydraulic systems of spindle oil applications. All ECOCUT HFN LE oils are recommended for normal to difficult machining operations on cast iron, steel and nonferrous metals. The optimized heat transfer properties permit higher feed and cutting speeds. The abbreviation LE means “Low evaporation” and stands for excellent anti-mist properties and low evaporation during use. Such oils contribute towards reducing environmental and workshop pollution.
- Metal Working
FUCHS RATAK HFN 15B
0 out of 5(0)RATAK HFN 15B is a low misting honing oil based on a high grade solvent raffinate with a carefully balanced EP Combination. RATAK HFN 15B has excellent flushing properties and it promotes rapid sedimentation of swarfs. The use of special base oil and a specially selected combination of effective substances reduces the oil mist.
- Lubricants, Metal Working
CRC SUPER TAPPING FLUID II
0 out of 5(0)CRC Super Tapping Fluid II is a blend of highly refined base oils and synthetic additives, designed to meet the most stringent requirements for all machining operations on both ferrous and non-ferrous metals (tough alloys, stainless steel, nickel alloys, aluminum, brass). The additives create a strong film that can withstand extreme pressure to increase tool life and ease tapping.
- Lubricants, Metal Working
Fuchs Ecocool 600 NBF C
0 out of 5(0)Water Miscible Semi-synthetic Coolant for Medium Machinability
ECOCOOL 600 NBF C is a low-mineral oil contained, water-miscible semi-synthetic cutting fluid which is specially designed for multi-purpose machining applications on cast iron, carbon steel and ferrous alloys. It will form a long-life, stable and finely dispersed clear translucent emulsion when mixed with water. ECOCOOL 600 NBF C is free of nitrite, chlorine and phenols. ECOCOOL 600 NBF C is recommended for drilling, milling, reaming, tapping, boring, and grinding operations.
- Metal Working
FUCHS Ecocool 705-I
0 out of 5(0)ECOCOOL 705-I is a unique cutting fluid designed to meet the increasing demands on Aluminium Industry. Especially well suited to applications where clarity and foam control are critical, forming a opaque solution in water, free from chlorine, nitrites and phenols. suitable for the machining of Aluminium from general to difficult machining applications where water soluble cutting fluid is required.
- Lubricants, Metal Working
Fuchs Ecocool Soluble 30*
0 out of 5(0)ECOCOOL SOLUBLE 30* is a low mineral oil, water- miscible coolant designed for grinding and light
machining of steel. ECOCOOL SOLUBLE 30* produces a long-life, stable and finely dispersed beige opalescent emulsion when mixed with water. ECOCOOL SOLUBLE 30* is free of Nitrite and PTBBA and contains no substances designated as hazardous. ECOCOOL SOLUBLE 30* is recommended for all grinding, drilling and milling operations on steel. - Metal Working
FUCHS ECOCUT 715
0 out of 5(0)ECOCUT 715 is a low misting, neat cutting oil containing a high percentage of chlorine-free EP combination and polar lubricity improvers. The use of a special base and selected additive packages in ECOCUT 715 significantly reduces oil mist formation in comparison to conventional cutting oils.
- Metal Working
FUCHS Ecocut HFN 10 LE
0 out of 5(0)The Ecocut HFN LE series of products are designed as multipurpose oils for cutting, grinding and especially the low viscosity grades-for honing operations with the bonus of being rationalization products for hydraulic systems of spindle oil applications. All Ecocut HFN LE oils are recommended for normal to difficult machining operations on cast iron, steel and nonferrous metals. The optimized heat transfer properties permit higher feed and cutting speeds. The abbreviation LE means “ Low evaporation” and stands for excellent anti-mist properties and low evaporation during use. Such oils contribute towards reducing environmental and workshop pollution.
- Metal Working
FUCHS ECOCUT HFN 16
0 out of 5(0)The Ecocut HFN LE series of products are designed as multipurpose oils for cutting, grinding and especially the low viscosity grades-for honing operations with the bonus of being rationalization products for hydraulic systems of spindle oil applications. All Ecocut HFN LE oils are recommended for normal to difficult machining operations on cast iron, steel and nonferrous metals. The optimized heat transfer properties permit higher feed and cutting speeds. The abbreviation LE means “ Low evaporation” and stands for excellent anti-mist properties and low evaporation during use. Such oils contribute towards reducing environmental and workshop pollution.
- Metal Working
FUCHS ECOCUT HFN 16 LE
0 out of 5(0)The ECOCUT HFN LE series of products are designed as multipurpose oils for cutting, grinding and especially the low viscosity grades-for honing operations with the bonus of being rationalization products for hydraulic systems of spindle oil applications. All ECOCUT HFN LE oils are recommended for normal to difficult machining operations on cast iron, steel and nonferrous metals. The optimized heat transfer properties permit higher feed and cutting speeds. The abbreviation LE means “Low evaporation” and stands for excellent anti-mist properties and low evaporation during use. Such oils contribute towards reducing environmental and workshop pollution.
- Metal Working
FUCHS ECOCUT HFN 5 LE
0 out of 5(0)The ECOCUT HFN LE series of products are designed as multipurpose oils for cutting, grinding and especially the low viscosity grades-for honing operations with the bonus of being rationalization products for hydraulic systems of spindle oil applications. All ECOCUT HFN LE oils are recommended for normal to difficult machining operations on cast iron, steel and nonferrous metals. The optimized heat transfer properties permit higher feed and cutting speeds. The abbreviation LE means “Low evaporation” and stands for excellent anti-mist properties and low evaporation during use. Such oils contribute towards reducing environmental and workshop pollution.
- Metal Working
FUCHS RATAK HFN 15B
0 out of 5(0)RATAK HFN 15B is a low misting honing oil based on a high grade solvent raffinate with a carefully balanced EP Combination. RATAK HFN 15B has excellent flushing properties and it promotes rapid sedimentation of swarfs. The use of special base oil and a specially selected combination of effective substances reduces the oil mist.
- Lubricants, Metal Working
CRC SUPER TAPPING FLUID II
CRC Super Tapping Fluid II is a blend of highly refined base oils and synthetic additives, designed to meet the most stringent requirements for all machining operations on both ferrous and non-ferrous metals (tough alloys, stainless steel, nickel alloys, aluminum, brass). The additives create a strong film that can withstand extreme pressure to increase tool life and ease tapping.
0 out of 5(0) - Lubricants, Metal Working
Fuchs Ecocool 600 NBF C
Water Miscible Semi-synthetic Coolant for Medium Machinability
ECOCOOL 600 NBF C is a low-mineral oil contained, water-miscible semi-synthetic cutting fluid which is specially designed for multi-purpose machining applications on cast iron, carbon steel and ferrous alloys. It will form a long-life, stable and finely dispersed clear translucent emulsion when mixed with water. ECOCOOL 600 NBF C is free of nitrite, chlorine and phenols. ECOCOOL 600 NBF C is recommended for drilling, milling, reaming, tapping, boring, and grinding operations.
0 out of 5(0) - Metal Working
FUCHS Ecocool 705-I
ECOCOOL 705-I is a unique cutting fluid designed to meet the increasing demands on Aluminium Industry. Especially well suited to applications where clarity and foam control are critical, forming a opaque solution in water, free from chlorine, nitrites and phenols. suitable for the machining of Aluminium from general to difficult machining applications where water soluble cutting fluid is required.
0 out of 5(0) - Lubricants, Metal Working
Fuchs Ecocool Soluble 30*
ECOCOOL SOLUBLE 30* is a low mineral oil, water- miscible coolant designed for grinding and light
machining of steel. ECOCOOL SOLUBLE 30* produces a long-life, stable and finely dispersed beige opalescent emulsion when mixed with water. ECOCOOL SOLUBLE 30* is free of Nitrite and PTBBA and contains no substances designated as hazardous. ECOCOOL SOLUBLE 30* is recommended for all grinding, drilling and milling operations on steel.0 out of 5(0) - Metal Working
FUCHS ECOCUT 715
ECOCUT 715 is a low misting, neat cutting oil containing a high percentage of chlorine-free EP combination and polar lubricity improvers. The use of a special base and selected additive packages in ECOCUT 715 significantly reduces oil mist formation in comparison to conventional cutting oils.
0 out of 5(0) - Metal Working
FUCHS Ecocut HFN 10 LE
The Ecocut HFN LE series of products are designed as multipurpose oils for cutting, grinding and especially the low viscosity grades-for honing operations with the bonus of being rationalization products for hydraulic systems of spindle oil applications. All Ecocut HFN LE oils are recommended for normal to difficult machining operations on cast iron, steel and nonferrous metals. The optimized heat transfer properties permit higher feed and cutting speeds. The abbreviation LE means “ Low evaporation” and stands for excellent anti-mist properties and low evaporation during use. Such oils contribute towards reducing environmental and workshop pollution.
0 out of 5(0) - Metal Working
FUCHS ECOCUT HFN 16
The Ecocut HFN LE series of products are designed as multipurpose oils for cutting, grinding and especially the low viscosity grades-for honing operations with the bonus of being rationalization products for hydraulic systems of spindle oil applications. All Ecocut HFN LE oils are recommended for normal to difficult machining operations on cast iron, steel and nonferrous metals. The optimized heat transfer properties permit higher feed and cutting speeds. The abbreviation LE means “ Low evaporation” and stands for excellent anti-mist properties and low evaporation during use. Such oils contribute towards reducing environmental and workshop pollution.
0 out of 5(0) - Metal Working
FUCHS ECOCUT HFN 16 LE
The ECOCUT HFN LE series of products are designed as multipurpose oils for cutting, grinding and especially the low viscosity grades-for honing operations with the bonus of being rationalization products for hydraulic systems of spindle oil applications. All ECOCUT HFN LE oils are recommended for normal to difficult machining operations on cast iron, steel and nonferrous metals. The optimized heat transfer properties permit higher feed and cutting speeds. The abbreviation LE means “Low evaporation” and stands for excellent anti-mist properties and low evaporation during use. Such oils contribute towards reducing environmental and workshop pollution.
0 out of 5(0) - Metal Working
FUCHS ECOCUT HFN 5 LE
The ECOCUT HFN LE series of products are designed as multipurpose oils for cutting, grinding and especially the low viscosity grades-for honing operations with the bonus of being rationalization products for hydraulic systems of spindle oil applications. All ECOCUT HFN LE oils are recommended for normal to difficult machining operations on cast iron, steel and nonferrous metals. The optimized heat transfer properties permit higher feed and cutting speeds. The abbreviation LE means “Low evaporation” and stands for excellent anti-mist properties and low evaporation during use. Such oils contribute towards reducing environmental and workshop pollution.
0 out of 5(0) - Metal Working
FUCHS RATAK HFN 15B
RATAK HFN 15B is a low misting honing oil based on a high grade solvent raffinate with a carefully balanced EP Combination. RATAK HFN 15B has excellent flushing properties and it promotes rapid sedimentation of swarfs. The use of special base oil and a specially selected combination of effective substances reduces the oil mist.
0 out of 5(0)
Showing 1–15 of 22 results