Aerosols
Showing all 10 results
- Aerosols, Electrical
3M Scotch 1602 Insulating Spray
3M™ Electrical Insulating Sealer 1602-R is an electrical-grade, fast-drying sealer and insulator. This sealer comes in a pressurized can and helps to protect surfaces from weather, moisture, corrosion, oil, alkalis and acids.
3M™ Electrical Insulating Sealer 1602-R easily reaches inaccessible spots. This sealer can be sprayed over insulation on wire and cable splices as a general-purpose sealer or for touch-up insulation on motor windings and frames.
- Aerosols, Electrical
3M Scotch 1605 Dehumidifier Spray
Dehumidifier Spray Scotch® 1605 penetrates and displaces moisture. It also defrosts frozen sections. Scotch® 1605 then forms a thin protective film and thus prevents the renewed ingress of moisture. It is completely neutral toward paints, plastics, rubber and fabrics. It is effective over a wide temperature range from -74°C to + 175°C.
- Aerosols, Electrical
3M Scotch 1625 Contact Cleaner
Contact Cleaner, Scotch® 1625, loosens dirt, light oxide layers and impurities of every kind in an effective gentle manner. Scotch® 1625 is electrically neutral and totally residue-free, making it ideal for use in almost any environment as a spray cleaner.
- Aerosols, Electrical
3M™ Zinc Spray 16-501
3M™ Zinc Spray 16-501 is a dispersion of fine powdered 97% pure zinc in petroleum distillates. This spray is formulated to inhibit rust and corrosion of metal surfaces. It is suitable for use in transmission and distribution equipment including towers, transformers, light standards and other metal and galvanized surfaces. 3M™ Zinc Spray 16-501 is halogen-free and leaves a barrier coating similar to hot-dipped galvanized surfaces. With its instant drying capability, this non-corrosive spray preserves base metal, even when scratched or chafed. RoHS 2011/65/EU Compliant.
- Aerosols, Aerosols, Aerosols, Coatings, Corrosion Protection, Lubricants, Rust Preventives
ANTICORIT SYNTH SPRAY
ANTICORIT SYNTH SPRAY is based on fully synthetic universal oil with mild odour and excellent penetration
properties. The product leaves a thin oily and transparent film with an outstanding corrosion protection. This film can be removed easily with low alkaline cleaners.Best on the unique lubrication effect squeaking and stick-slip effects will be minimised. The dewatering
effect and excellent cleaning ability of ANTICORIT SYNTH SPRAY secures electrical contacts, this
means the product can be used for initial aid of engines. The product can be applied as simple cutting
oil, too. ANTICORIT SYNTH SPRAY is free of silicones, Teflon, graphite, MoS2, CFC and heavy metals.Advantages
· Stops squeaking and stick-slip effects
· Outstanding corrosion protection
· Dissolves tight or corroded connections
· Can be used as cutting oil
· Dewatering effect
· Secures electrical contacts
· Lubricating and cleaning effect
· Free of silicon, Teflon, graphite, MoS2, CFC and heavy metals - Aerosols, Cleaners, Cleaners, Electrical
CRC Minus 50
Coolant for electrical and electronic use. CRC Minus 50 is a non-flammable, inert dry coolant spray for maintenance, trouble shooting and repair. Used to cool down parts and components to temperatures below 0°C to a minimum of -50°C; the tracking of intermittent faults, the detection of hairline cracks, and the locating of defective components becomes easier.
- Aerosols, Aerosols, Aerosols, Aerosols
CRC Torch Ceramic Anti Spatter
High-performance ceramic anti-spatter spray, providing long lasting protection against spatter build-up on the torch and welding equipment.
Benefits:
- Eliminates excessive spatter built-up on welding equipment
- Protects gas nozzles, contact tips and contact tip holders
- Prevents the adhesion of metal
- Increase tool life
- Ensures a free gas flow and free supply of the welding wire
- Only one treatment needed per shift
Applications:
- MIG/MAG Welding
- Welding robots
Characteristics:
- Leaves a dry, white and thin Ceramic protective coating
- Long lasting torch protection (±8 hours)
- Temperature resistant, up to 900ºC in air and up to 2000ºC under inert conditions
- Silicone free
- Quick Drying (±15 seconds)
- Excellent surface adhesion
- No halogenated components
- Adhesive, Aerosols, Aerosols, Cleaners
Loctite SF 790
Paint Stripper is a chemical liquid that lifts off baked-on gaskets, gasket cements, formed-in-place gaskets, carbon deposits, dried oil, grease, and paint on any type of metal in minutes. LOCTITE® Paint Stripper is packaged in a convenient spray liquid that penetrates and cleans intricate shapes and will not run off, even on vertical surfaces. It is also ideal for removing high temperature engine paints prior to repainting and paint and varnish from wood surfaces.
- Aerosols, Electrical
3M Scotch 1602 Insulating Spray
3M™ Electrical Insulating Sealer 1602-R is an electrical-grade, fast-drying sealer and insulator. This sealer comes in a pressurized can and helps to protect surfaces from weather, moisture, corrosion, oil, alkalis and acids.
3M™ Electrical Insulating Sealer 1602-R easily reaches inaccessible spots. This sealer can be sprayed over insulation on wire and cable splices as a general-purpose sealer or for touch-up insulation on motor windings and frames.
- Aerosols, Electrical
3M Scotch 1605 Dehumidifier Spray
Dehumidifier Spray Scotch® 1605 penetrates and displaces moisture. It also defrosts frozen sections. Scotch® 1605 then forms a thin protective film and thus prevents the renewed ingress of moisture. It is completely neutral toward paints, plastics, rubber and fabrics. It is effective over a wide temperature range from -74°C to + 175°C.
- Aerosols, Electrical
3M Scotch 1625 Contact Cleaner
Contact Cleaner, Scotch® 1625, loosens dirt, light oxide layers and impurities of every kind in an effective gentle manner. Scotch® 1625 is electrically neutral and totally residue-free, making it ideal for use in almost any environment as a spray cleaner.
- Aerosols, Electrical
3M™ Zinc Spray 16-501
3M™ Zinc Spray 16-501 is a dispersion of fine powdered 97% pure zinc in petroleum distillates. This spray is formulated to inhibit rust and corrosion of metal surfaces. It is suitable for use in transmission and distribution equipment including towers, transformers, light standards and other metal and galvanized surfaces. 3M™ Zinc Spray 16-501 is halogen-free and leaves a barrier coating similar to hot-dipped galvanized surfaces. With its instant drying capability, this non-corrosive spray preserves base metal, even when scratched or chafed. RoHS 2011/65/EU Compliant.
- Aerosols, Aerosols, Aerosols, Coatings, Corrosion Protection, Lubricants, Rust Preventives
ANTICORIT SYNTH SPRAY
ANTICORIT SYNTH SPRAY is based on fully synthetic universal oil with mild odour and excellent penetration
properties. The product leaves a thin oily and transparent film with an outstanding corrosion protection. This film can be removed easily with low alkaline cleaners.Best on the unique lubrication effect squeaking and stick-slip effects will be minimised. The dewatering
effect and excellent cleaning ability of ANTICORIT SYNTH SPRAY secures electrical contacts, this
means the product can be used for initial aid of engines. The product can be applied as simple cutting
oil, too. ANTICORIT SYNTH SPRAY is free of silicones, Teflon, graphite, MoS2, CFC and heavy metals.Advantages
· Stops squeaking and stick-slip effects
· Outstanding corrosion protection
· Dissolves tight or corroded connections
· Can be used as cutting oil
· Dewatering effect
· Secures electrical contacts
· Lubricating and cleaning effect
· Free of silicon, Teflon, graphite, MoS2, CFC and heavy metals - Aerosols, Cleaners, Cleaners, Electrical
CRC Minus 50
Coolant for electrical and electronic use. CRC Minus 50 is a non-flammable, inert dry coolant spray for maintenance, trouble shooting and repair. Used to cool down parts and components to temperatures below 0°C to a minimum of -50°C; the tracking of intermittent faults, the detection of hairline cracks, and the locating of defective components becomes easier.
- Aerosols, Aerosols, Aerosols, Aerosols
CRC Torch Ceramic Anti Spatter
High-performance ceramic anti-spatter spray, providing long lasting protection against spatter build-up on the torch and welding equipment.
Benefits:
- Eliminates excessive spatter built-up on welding equipment
- Protects gas nozzles, contact tips and contact tip holders
- Prevents the adhesion of metal
- Increase tool life
- Ensures a free gas flow and free supply of the welding wire
- Only one treatment needed per shift
Applications:
- MIG/MAG Welding
- Welding robots
Characteristics:
- Leaves a dry, white and thin Ceramic protective coating
- Long lasting torch protection (±8 hours)
- Temperature resistant, up to 900ºC in air and up to 2000ºC under inert conditions
- Silicone free
- Quick Drying (±15 seconds)
- Excellent surface adhesion
- No halogenated components
- Adhesive, Aerosols, Aerosols, Cleaners
Loctite SF 790
Paint Stripper is a chemical liquid that lifts off baked-on gaskets, gasket cements, formed-in-place gaskets, carbon deposits, dried oil, grease, and paint on any type of metal in minutes. LOCTITE® Paint Stripper is packaged in a convenient spray liquid that penetrates and cleans intricate shapes and will not run off, even on vertical surfaces. It is also ideal for removing high temperature engine paints prior to repainting and paint and varnish from wood surfaces.
- Aerosols, Electrical
3M Scotch 1602 Insulating Spray
3M™ Electrical Insulating Sealer 1602-R is an electrical-grade, fast-drying sealer and insulator. This sealer comes in a pressurized can and helps to protect surfaces from weather, moisture, corrosion, oil, alkalis and acids.
3M™ Electrical Insulating Sealer 1602-R easily reaches inaccessible spots. This sealer can be sprayed over insulation on wire and cable splices as a general-purpose sealer or for touch-up insulation on motor windings and frames.
- Aerosols, Electrical
3M Scotch 1605 Dehumidifier Spray
Dehumidifier Spray Scotch® 1605 penetrates and displaces moisture. It also defrosts frozen sections. Scotch® 1605 then forms a thin protective film and thus prevents the renewed ingress of moisture. It is completely neutral toward paints, plastics, rubber and fabrics. It is effective over a wide temperature range from -74°C to + 175°C.
- Aerosols, Electrical
3M Scotch 1625 Contact Cleaner
Contact Cleaner, Scotch® 1625, loosens dirt, light oxide layers and impurities of every kind in an effective gentle manner. Scotch® 1625 is electrically neutral and totally residue-free, making it ideal for use in almost any environment as a spray cleaner.
- Aerosols, Electrical
3M™ Zinc Spray 16-501
3M™ Zinc Spray 16-501 is a dispersion of fine powdered 97% pure zinc in petroleum distillates. This spray is formulated to inhibit rust and corrosion of metal surfaces. It is suitable for use in transmission and distribution equipment including towers, transformers, light standards and other metal and galvanized surfaces. 3M™ Zinc Spray 16-501 is halogen-free and leaves a barrier coating similar to hot-dipped galvanized surfaces. With its instant drying capability, this non-corrosive spray preserves base metal, even when scratched or chafed. RoHS 2011/65/EU Compliant.
- Aerosols, Aerosols, Aerosols, Coatings, Corrosion Protection, Lubricants, Rust Preventives
ANTICORIT SYNTH SPRAY
ANTICORIT SYNTH SPRAY is based on fully synthetic universal oil with mild odour and excellent penetration
properties. The product leaves a thin oily and transparent film with an outstanding corrosion protection. This film can be removed easily with low alkaline cleaners.Best on the unique lubrication effect squeaking and stick-slip effects will be minimised. The dewatering
effect and excellent cleaning ability of ANTICORIT SYNTH SPRAY secures electrical contacts, this
means the product can be used for initial aid of engines. The product can be applied as simple cutting
oil, too. ANTICORIT SYNTH SPRAY is free of silicones, Teflon, graphite, MoS2, CFC and heavy metals.Advantages
· Stops squeaking and stick-slip effects
· Outstanding corrosion protection
· Dissolves tight or corroded connections
· Can be used as cutting oil
· Dewatering effect
· Secures electrical contacts
· Lubricating and cleaning effect
· Free of silicon, Teflon, graphite, MoS2, CFC and heavy metals - Aerosols, Cleaners, Cleaners, Electrical
CRC Minus 50
Coolant for electrical and electronic use. CRC Minus 50 is a non-flammable, inert dry coolant spray for maintenance, trouble shooting and repair. Used to cool down parts and components to temperatures below 0°C to a minimum of -50°C; the tracking of intermittent faults, the detection of hairline cracks, and the locating of defective components becomes easier.
- Aerosols, Aerosols, Aerosols, Aerosols
CRC Torch Ceramic Anti Spatter
High-performance ceramic anti-spatter spray, providing long lasting protection against spatter build-up on the torch and welding equipment.
Benefits:
- Eliminates excessive spatter built-up on welding equipment
- Protects gas nozzles, contact tips and contact tip holders
- Prevents the adhesion of metal
- Increase tool life
- Ensures a free gas flow and free supply of the welding wire
- Only one treatment needed per shift
Applications:
- MIG/MAG Welding
- Welding robots
Characteristics:
- Leaves a dry, white and thin Ceramic protective coating
- Long lasting torch protection (±8 hours)
- Temperature resistant, up to 900ºC in air and up to 2000ºC under inert conditions
- Silicone free
- Quick Drying (±15 seconds)
- Excellent surface adhesion
- No halogenated components
- Adhesive, Aerosols, Aerosols, Cleaners
Loctite SF 790
Paint Stripper is a chemical liquid that lifts off baked-on gaskets, gasket cements, formed-in-place gaskets, carbon deposits, dried oil, grease, and paint on any type of metal in minutes. LOCTITE® Paint Stripper is packaged in a convenient spray liquid that penetrates and cleans intricate shapes and will not run off, even on vertical surfaces. It is also ideal for removing high temperature engine paints prior to repainting and paint and varnish from wood surfaces.