Corrosion Resisting
Showing 1–15 of 18 results
- Aerosols, Coatings, Corrosion Resisting
CRC ALU High Temperature
Protective coating with aluminum look.
Resists high temperatures. Paint that resists high peak temperatures up to 600°C. Provides a hard and durable surface, which does not burn, crack or scale down, even at high temperatures.Withstands large fluctuations in temperature. Excellent weather resistance.
- Aerosols, Coatings, Corrosion Resisting
CRC Urethane Isolation Red
Red colored one-component, urethane type coating. Urethane coating seals out water and moisture and acts as a barrier for contaminants. The coating dries fast and adheres well to most surfaces. After curing, the protective film has a high flexibility, is durable and resists abrasion and contamination.
- Aerosols, Coatings, Corrosion Resisting
CRC Zinc
Cathodic protection, even for damaged galvanized parts.
Zinc based coating with excellent adhesion to metal surfaces. The high zinc content is sacrificed during the corrosion process and so provides a galvanic protection of the treated metal. The dry coating contains a maximum amount of zinc (purity 98%), ensuring a self-healing effect when the coating gets scratched. The dry coating is matt and has an excellent surface structure to be painted.
- Coatings, Composite Repair, Corrosion Resisting, Speciality Coatings, Structural Coatings, Wear Resistant
LOCTITE 7226 PNEU WEAR KT – 10KG.
LOCTITE® PC 7226 is a 2-part, grey, carbide-filled, trowelable, non-sagging, epoxy-based surface coating for protecting processing equipment from fine particle abrasion (with or without chemical attack). It is suitable for overhead and vertical surfaces. Typical applications include dredge pump liners, flumes and troughs, pump impellers, vibrating feeders, and chutes/hoppers.
- Coatings, Composite Repair, Corrosion Resisting, Speciality Coatings, Structural Coatings
LOCTITE PC 5085
This innovative repair solution for steel pipes is a fast and economical alternative to pipe replacements. Providing components for surface preparation, reinforcement and top coating, this all-in-one solution is applied directly to the pipe’s surface. The repair system reinforces and seals steel pipes designed for high pressure, temperature and chemical resistance.
Loctite® 5085™ is used in combination with Loctite® 7210, an epoxy resin, as a composite repair system to repair and protect metal pipes and tanks in the petroleum, petrochemical and natural gas industry. It can be used to repair damaged and corroded parts where high strength is required, together with corrosion protection and chemical resistance. Typical applications include sealing and repairing cracked tanks, pipes, pipe joints and reinforcing tanks, joints and elbows. Loctite® 5085™ should not be used on a pipeline that is carrying caustic, hazardous or otherwise harmful materials. This product is typically used in applications up to 80°C (175F).
- Composite Repair, Corrosion Resisting, Speciality Coatings, Structural Coatings, Wear Resistant
Loctite PC 7000
The product is a water-based, environmentally responsible, three-component rapid setting silica-based composite coating system that offers multiple advantages. Protects industrial processing equipment like coal tip burners in boilers against wear due to abrasion at harsh temperatures of up to 1100 degree Celsius. Acts as a protective barrier against surface abrasion and softening of the tip surface in the most punishing conditions, such as those where burner tips are exposed to the radiated heat of boiler house fire. Components retain their original shape much longer, resulting in sustained boiler efficiency and reduced unplanned downtime.
- Coatings, Composite Repair, Corrosion Resisting, Epoxies, Speciality Coatings, Structural Coatings
Loctite PC 7210 (1Kg)
Loctite 7210 is a two component epoxy resin suitable for impregnation of glass, carbon, or hybrid fibers. It can also be used alone (potting), or in combination with fibers (composite) to reinforce worn steel construction elements, where corrosion protection, tensile strength and fatigue resistance are required. When used with fiber tapes it is recommended to use it in conjunction with glass-carbon fiber tape Loctite 5085.
- Composite Repair, Concrete Repair, Corrosion Resisting, Speciality Coatings, Structural Coatings, Wear Resistant
Loctite PC 7234
LOCTITE® PC 7234 is a 2-part, grey, ceramic-filled, brushable epoxy surface coating providing high temperature resistance in a temperature range from -30 to +205°C. It creates a high gloss, low friction sacrificial surface that protects against fine particle abrasion. It also works well as a top coat over LOCTITE wearing compounds for applications requiring surface rebuilding and lasting protection.
- Coatings, Composite Repair, Corrosion Resisting, Speciality Coatings, Structural Coatings, Wear Resistant
Loctite PC 7234 High Temp. Brushable Ceramic
LOCTITE® Nordbak® High Temperature Brushable Ceramic is an impervious ceramic composite that offers an ultra smooth glossy surface. This technology significantly improves and reduces the surface friction that causes “boundary drag”. The improved surface smoothness assists where applications require maximum fluid flow efficiency whilst protecting against abrasion, turbulence, corrosion/erosion under typical dry service temperatures of -29 °C to +287 °C.
- Coatings, Concrete Repair, Corrosion Resisting, Speciality Coatings, Structural Coatings
Loctite PC 7319 Chemical Resistant Coating
LOCTITE® PC 7319 is a gray, 2-part, liquid epoxy coating designed to protect equipment and concrete against extreme corrosion caused by chemical exposure. It forms a glossy, low friction surface under service temperatures of -22 °F to +248 °F (-30 °C to +120 °C). It is used to prevent corrosion or to line tanks and chutes, chemical containment areas, concrete pits, tanks, floors and foundations.
- Coatings, Composite Repair, Concrete Repair, Corrosion Resisting, Speciality Coatings, Structural Coatings, Wear Resistant
Loctite PC 9340
LOCTITE PC 9340 High Temperature Chemical Resistant Coating is designed to protect chemical storage and processing equipment against extreme corrosion caused by chemical exposure under heat. Its improved surface smoothness assists where applications require maximum fluid flow efficiency while protecting against abrasion, turbulence, corrosion / erosion, under typical service temperatures of -30℃ to 210℃ (-20℉ to 410℉).
- Coatings, Corrosion Resisting
Loctite PC 9660
LOCTITE® PC 9660 (known as MAXI-COAT) is a dark brown petroleum solvent-based compound which prevents corrosion. It gives heavy-duty, thick film protection in outdoor conditions. It doesn’t melt in direct sunlight and withstands salt spray as well as other severe corrosion environments. Typical applications include use as a non-splattering chain lube and a rust inhibitor for machinery.
- Aerosols, Coatings, Corrosion Resisting
CRC ALU High Temperature
Protective coating with aluminum look.
Resists high temperatures. Paint that resists high peak temperatures up to 600°C. Provides a hard and durable surface, which does not burn, crack or scale down, even at high temperatures.Withstands large fluctuations in temperature. Excellent weather resistance.
- Aerosols, Coatings, Corrosion Resisting
CRC Urethane Isolation Red
Red colored one-component, urethane type coating. Urethane coating seals out water and moisture and acts as a barrier for contaminants. The coating dries fast and adheres well to most surfaces. After curing, the protective film has a high flexibility, is durable and resists abrasion and contamination.
- Aerosols, Coatings, Corrosion Resisting
CRC Zinc
Cathodic protection, even for damaged galvanized parts.
Zinc based coating with excellent adhesion to metal surfaces. The high zinc content is sacrificed during the corrosion process and so provides a galvanic protection of the treated metal. The dry coating contains a maximum amount of zinc (purity 98%), ensuring a self-healing effect when the coating gets scratched. The dry coating is matt and has an excellent surface structure to be painted.
- Coatings, Composite Repair, Corrosion Resisting, Speciality Coatings, Structural Coatings, Wear Resistant
LOCTITE 7226 PNEU WEAR KT – 10KG.
LOCTITE® PC 7226 is a 2-part, grey, carbide-filled, trowelable, non-sagging, epoxy-based surface coating for protecting processing equipment from fine particle abrasion (with or without chemical attack). It is suitable for overhead and vertical surfaces. Typical applications include dredge pump liners, flumes and troughs, pump impellers, vibrating feeders, and chutes/hoppers.
- Coatings, Composite Repair, Corrosion Resisting, Speciality Coatings, Structural Coatings
LOCTITE PC 5085
This innovative repair solution for steel pipes is a fast and economical alternative to pipe replacements. Providing components for surface preparation, reinforcement and top coating, this all-in-one solution is applied directly to the pipe’s surface. The repair system reinforces and seals steel pipes designed for high pressure, temperature and chemical resistance.
Loctite® 5085™ is used in combination with Loctite® 7210, an epoxy resin, as a composite repair system to repair and protect metal pipes and tanks in the petroleum, petrochemical and natural gas industry. It can be used to repair damaged and corroded parts where high strength is required, together with corrosion protection and chemical resistance. Typical applications include sealing and repairing cracked tanks, pipes, pipe joints and reinforcing tanks, joints and elbows. Loctite® 5085™ should not be used on a pipeline that is carrying caustic, hazardous or otherwise harmful materials. This product is typically used in applications up to 80°C (175F).
- Composite Repair, Corrosion Resisting, Speciality Coatings, Structural Coatings, Wear Resistant
Loctite PC 7000
The product is a water-based, environmentally responsible, three-component rapid setting silica-based composite coating system that offers multiple advantages. Protects industrial processing equipment like coal tip burners in boilers against wear due to abrasion at harsh temperatures of up to 1100 degree Celsius. Acts as a protective barrier against surface abrasion and softening of the tip surface in the most punishing conditions, such as those where burner tips are exposed to the radiated heat of boiler house fire. Components retain their original shape much longer, resulting in sustained boiler efficiency and reduced unplanned downtime.
- Coatings, Composite Repair, Corrosion Resisting, Epoxies, Speciality Coatings, Structural Coatings
Loctite PC 7210 (1Kg)
Loctite 7210 is a two component epoxy resin suitable for impregnation of glass, carbon, or hybrid fibers. It can also be used alone (potting), or in combination with fibers (composite) to reinforce worn steel construction elements, where corrosion protection, tensile strength and fatigue resistance are required. When used with fiber tapes it is recommended to use it in conjunction with glass-carbon fiber tape Loctite 5085.
- Composite Repair, Concrete Repair, Corrosion Resisting, Speciality Coatings, Structural Coatings, Wear Resistant
Loctite PC 7234
LOCTITE® PC 7234 is a 2-part, grey, ceramic-filled, brushable epoxy surface coating providing high temperature resistance in a temperature range from -30 to +205°C. It creates a high gloss, low friction sacrificial surface that protects against fine particle abrasion. It also works well as a top coat over LOCTITE wearing compounds for applications requiring surface rebuilding and lasting protection.
- Coatings, Composite Repair, Corrosion Resisting, Speciality Coatings, Structural Coatings, Wear Resistant
Loctite PC 7234 High Temp. Brushable Ceramic
LOCTITE® Nordbak® High Temperature Brushable Ceramic is an impervious ceramic composite that offers an ultra smooth glossy surface. This technology significantly improves and reduces the surface friction that causes “boundary drag”. The improved surface smoothness assists where applications require maximum fluid flow efficiency whilst protecting against abrasion, turbulence, corrosion/erosion under typical dry service temperatures of -29 °C to +287 °C.
- Coatings, Concrete Repair, Corrosion Resisting, Speciality Coatings, Structural Coatings
Loctite PC 7319 Chemical Resistant Coating
LOCTITE® PC 7319 is a gray, 2-part, liquid epoxy coating designed to protect equipment and concrete against extreme corrosion caused by chemical exposure. It forms a glossy, low friction surface under service temperatures of -22 °F to +248 °F (-30 °C to +120 °C). It is used to prevent corrosion or to line tanks and chutes, chemical containment areas, concrete pits, tanks, floors and foundations.
- Coatings, Composite Repair, Concrete Repair, Corrosion Resisting, Speciality Coatings, Structural Coatings, Wear Resistant
Loctite PC 9340
LOCTITE PC 9340 High Temperature Chemical Resistant Coating is designed to protect chemical storage and processing equipment against extreme corrosion caused by chemical exposure under heat. Its improved surface smoothness assists where applications require maximum fluid flow efficiency while protecting against abrasion, turbulence, corrosion / erosion, under typical service temperatures of -30℃ to 210℃ (-20℉ to 410℉).
- Coatings, Corrosion Resisting
Loctite PC 9660
LOCTITE® PC 9660 (known as MAXI-COAT) is a dark brown petroleum solvent-based compound which prevents corrosion. It gives heavy-duty, thick film protection in outdoor conditions. It doesn’t melt in direct sunlight and withstands salt spray as well as other severe corrosion environments. Typical applications include use as a non-splattering chain lube and a rust inhibitor for machinery.
- Aerosols, Coatings, Corrosion Resisting
CRC ALU High Temperature
Protective coating with aluminum look.
Resists high temperatures. Paint that resists high peak temperatures up to 600°C. Provides a hard and durable surface, which does not burn, crack or scale down, even at high temperatures.Withstands large fluctuations in temperature. Excellent weather resistance.
- Aerosols, Coatings, Corrosion Resisting
CRC Urethane Isolation Red
Red colored one-component, urethane type coating. Urethane coating seals out water and moisture and acts as a barrier for contaminants. The coating dries fast and adheres well to most surfaces. After curing, the protective film has a high flexibility, is durable and resists abrasion and contamination.
- Aerosols, Coatings, Corrosion Resisting
CRC Zinc
Cathodic protection, even for damaged galvanized parts.
Zinc based coating with excellent adhesion to metal surfaces. The high zinc content is sacrificed during the corrosion process and so provides a galvanic protection of the treated metal. The dry coating contains a maximum amount of zinc (purity 98%), ensuring a self-healing effect when the coating gets scratched. The dry coating is matt and has an excellent surface structure to be painted.
- Coatings, Composite Repair, Corrosion Resisting, Speciality Coatings, Structural Coatings, Wear Resistant
LOCTITE 7226 PNEU WEAR KT – 10KG.
LOCTITE® PC 7226 is a 2-part, grey, carbide-filled, trowelable, non-sagging, epoxy-based surface coating for protecting processing equipment from fine particle abrasion (with or without chemical attack). It is suitable for overhead and vertical surfaces. Typical applications include dredge pump liners, flumes and troughs, pump impellers, vibrating feeders, and chutes/hoppers.
- Coatings, Composite Repair, Corrosion Resisting, Speciality Coatings, Structural Coatings
LOCTITE PC 5085
This innovative repair solution for steel pipes is a fast and economical alternative to pipe replacements. Providing components for surface preparation, reinforcement and top coating, this all-in-one solution is applied directly to the pipe’s surface. The repair system reinforces and seals steel pipes designed for high pressure, temperature and chemical resistance.
Loctite® 5085™ is used in combination with Loctite® 7210, an epoxy resin, as a composite repair system to repair and protect metal pipes and tanks in the petroleum, petrochemical and natural gas industry. It can be used to repair damaged and corroded parts where high strength is required, together with corrosion protection and chemical resistance. Typical applications include sealing and repairing cracked tanks, pipes, pipe joints and reinforcing tanks, joints and elbows. Loctite® 5085™ should not be used on a pipeline that is carrying caustic, hazardous or otherwise harmful materials. This product is typically used in applications up to 80°C (175F).
- Composite Repair, Corrosion Resisting, Speciality Coatings, Structural Coatings, Wear Resistant
Loctite PC 7000
The product is a water-based, environmentally responsible, three-component rapid setting silica-based composite coating system that offers multiple advantages. Protects industrial processing equipment like coal tip burners in boilers against wear due to abrasion at harsh temperatures of up to 1100 degree Celsius. Acts as a protective barrier against surface abrasion and softening of the tip surface in the most punishing conditions, such as those where burner tips are exposed to the radiated heat of boiler house fire. Components retain their original shape much longer, resulting in sustained boiler efficiency and reduced unplanned downtime.
- Coatings, Composite Repair, Corrosion Resisting, Epoxies, Speciality Coatings, Structural Coatings
Loctite PC 7210 (1Kg)
Loctite 7210 is a two component epoxy resin suitable for impregnation of glass, carbon, or hybrid fibers. It can also be used alone (potting), or in combination with fibers (composite) to reinforce worn steel construction elements, where corrosion protection, tensile strength and fatigue resistance are required. When used with fiber tapes it is recommended to use it in conjunction with glass-carbon fiber tape Loctite 5085.
- Composite Repair, Concrete Repair, Corrosion Resisting, Speciality Coatings, Structural Coatings, Wear Resistant
Loctite PC 7234
LOCTITE® PC 7234 is a 2-part, grey, ceramic-filled, brushable epoxy surface coating providing high temperature resistance in a temperature range from -30 to +205°C. It creates a high gloss, low friction sacrificial surface that protects against fine particle abrasion. It also works well as a top coat over LOCTITE wearing compounds for applications requiring surface rebuilding and lasting protection.
- Coatings, Composite Repair, Corrosion Resisting, Speciality Coatings, Structural Coatings, Wear Resistant
Loctite PC 7234 High Temp. Brushable Ceramic
LOCTITE® Nordbak® High Temperature Brushable Ceramic is an impervious ceramic composite that offers an ultra smooth glossy surface. This technology significantly improves and reduces the surface friction that causes “boundary drag”. The improved surface smoothness assists where applications require maximum fluid flow efficiency whilst protecting against abrasion, turbulence, corrosion/erosion under typical dry service temperatures of -29 °C to +287 °C.
- Coatings, Concrete Repair, Corrosion Resisting, Speciality Coatings, Structural Coatings
Loctite PC 7319 Chemical Resistant Coating
LOCTITE® PC 7319 is a gray, 2-part, liquid epoxy coating designed to protect equipment and concrete against extreme corrosion caused by chemical exposure. It forms a glossy, low friction surface under service temperatures of -22 °F to +248 °F (-30 °C to +120 °C). It is used to prevent corrosion or to line tanks and chutes, chemical containment areas, concrete pits, tanks, floors and foundations.
- Coatings, Composite Repair, Concrete Repair, Corrosion Resisting, Speciality Coatings, Structural Coatings, Wear Resistant
Loctite PC 9340
LOCTITE PC 9340 High Temperature Chemical Resistant Coating is designed to protect chemical storage and processing equipment against extreme corrosion caused by chemical exposure under heat. Its improved surface smoothness assists where applications require maximum fluid flow efficiency while protecting against abrasion, turbulence, corrosion / erosion, under typical service temperatures of -30℃ to 210℃ (-20℉ to 410℉).
- Coatings, Corrosion Resisting
Loctite PC 9660
LOCTITE® PC 9660 (known as MAXI-COAT) is a dark brown petroleum solvent-based compound which prevents corrosion. It gives heavy-duty, thick film protection in outdoor conditions. It doesn’t melt in direct sunlight and withstands salt spray as well as other severe corrosion environments. Typical applications include use as a non-splattering chain lube and a rust inhibitor for machinery.