Coatings
Showing 1–15 of 47 results
- Aerosols, Aerosols, Aerosols, Coatings, Corrosion Protection, Lubricants, Rust Preventives
ANTICORIT SYNTH SPRAY
ANTICORIT SYNTH SPRAY is based on fully synthetic universal oil with mild odour and excellent penetration
properties. The product leaves a thin oily and transparent film with an outstanding corrosion protection. This film can be removed easily with low alkaline cleaners.Best on the unique lubrication effect squeaking and stick-slip effects will be minimised. The dewatering
effect and excellent cleaning ability of ANTICORIT SYNTH SPRAY secures electrical contacts, this
means the product can be used for initial aid of engines. The product can be applied as simple cutting
oil, too. ANTICORIT SYNTH SPRAY is free of silicones, Teflon, graphite, MoS2, CFC and heavy metals.Advantages
· Stops squeaking and stick-slip effects
· Outstanding corrosion protection
· Dissolves tight or corroded connections
· Can be used as cutting oil
· Dewatering effect
· Secures electrical contacts
· Lubricating and cleaning effect
· Free of silicon, Teflon, graphite, MoS2, CFC and heavy metals - Aerosols, Coatings, Corrosion Resisting
CRC ALU High Temperature
Protective coating with aluminum look.
Resists high temperatures. Paint that resists high peak temperatures up to 600°C. Provides a hard and durable surface, which does not burn, crack or scale down, even at high temperatures.Withstands large fluctuations in temperature. Excellent weather resistance.
- Aerosols, Aerosols, Aerosols, Aerosols
CRC Torch Ceramic Anti Spatter
High-performance ceramic anti-spatter spray, providing long lasting protection against spatter build-up on the torch and welding equipment.
Benefits:
- Eliminates excessive spatter built-up on welding equipment
- Protects gas nozzles, contact tips and contact tip holders
- Prevents the adhesion of metal
- Increase tool life
- Ensures a free gas flow and free supply of the welding wire
- Only one treatment needed per shift
Applications:
- MIG/MAG Welding
- Welding robots
Characteristics:
- Leaves a dry, white and thin Ceramic protective coating
- Long lasting torch protection (±8 hours)
- Temperature resistant, up to 900ºC in air and up to 2000ºC under inert conditions
- Silicone free
- Quick Drying (±15 seconds)
- Excellent surface adhesion
- No halogenated components
- Aerosols, Coatings, Corrosion Resisting
CRC Urethane Isolation Red
Red colored one-component, urethane type coating. Urethane coating seals out water and moisture and acts as a barrier for contaminants. The coating dries fast and adheres well to most surfaces. After curing, the protective film has a high flexibility, is durable and resists abrasion and contamination.
- Aerosols, Coatings, Corrosion Resisting
CRC Zinc
Cathodic protection, even for damaged galvanized parts.
Zinc based coating with excellent adhesion to metal surfaces. The high zinc content is sacrificed during the corrosion process and so provides a galvanic protection of the treated metal. The dry coating contains a maximum amount of zinc (purity 98%), ensuring a self-healing effect when the coating gets scratched. The dry coating is matt and has an excellent surface structure to be painted.
- Aerosols, Coatings, Speciality Coatings
Loctite 3900
Henkel Loctite 3900 is a one component colorless acrylic conformal coating. Loctite 3900 Type AR, offers a quick room temperature cure, high dielectric strength, a precision spray nozzle, and contains no CFC’s or chlorinated solvents. This conformal coating is commonly used in applications with an operating range of -40 °C to 125 °C. 11 oz Aerosol.
- Aerosols, Coatings
Loctite 3900 Conformal Coating
Loctite 3900™ is a clear acrylic formulated without chlorinated solvents or CFC’s. The coating is spray-applied and air dries tack-free in five minutes to provide a tough environmental and solvent-resistant coating. The material provides protection of printed circuit boards, electronic components, thick-film circuits and other substrates. This product is typically used in applications with an operating range of -40 °C to +125 °C.
- Coatings, Composite Repair, Corrosion Resisting, Speciality Coatings, Structural Coatings, Wear Resistant
LOCTITE 7226 PNEU WEAR KT – 10KG.
LOCTITE® PC 7226 is a 2-part, grey, carbide-filled, trowelable, non-sagging, epoxy-based surface coating for protecting processing equipment from fine particle abrasion (with or without chemical attack). It is suitable for overhead and vertical surfaces. Typical applications include dredge pump liners, flumes and troughs, pump impellers, vibrating feeders, and chutes/hoppers.
- Coatings, Concrete Repair, Structural Coatings
Loctite 7320 Polypoxy PS
LOCTITE PC 7320 is a solvent-free epoxy coating designed to protect steel and concrete from environmental influences. When it has dried completely, this coating will provide exceptional levels of hardness, flexibility, resistance to impact & corrosion. This product also has good water resistance so that it can be directly applied to waterlogged environments. LOCTITE® PC 7230 PolyPoxy PS is a 2-part, grey, ceramic-filled, trowelable epoxy compound surface coating with high temperature resistance, from -30 to +230°C. The compound protects processing equipment from coarse particle abrasion by creating a sacrificial coating to preserve the structural integrity of the original substrate. Trowelable consistency makes this product a good choice for application to overhead and vertical surfaces.
- Coatings, Concrete Repair
Loctite 9626 (Deep Pour Grout)
LOCTITE® PC 9626 is a black, 2-part, thick aggregate-filled liquid epoxy system designed for grouting up to 6 in (150 mm) deep, including self-leveling applications under rails and sole plates at typical dry service temperatures of -20 °F to +225 °F (-30 °C to +105 °C). It can withstand high torque loading.
- Coatings, Composite Repair, Speciality Coatings
Loctite EA 3471
LOCTITE® EA 3471 is a 2-part, grey, non-sagging epoxy putty which is easy to apply with no need for heating or welding. Typical applications include repairing non-structural defects in castings, making jigs and fixtures, sealing vessels, tanks and valves, resurfacing worn air seals and filling cavitated areas. This product is typically used in applications with an operating range of -30 to +105°C.
- Aerosols, Aerosols, Aerosols, Coatings, Corrosion Protection, Lubricants, Rust Preventives
ANTICORIT SYNTH SPRAY
ANTICORIT SYNTH SPRAY is based on fully synthetic universal oil with mild odour and excellent penetration
properties. The product leaves a thin oily and transparent film with an outstanding corrosion protection. This film can be removed easily with low alkaline cleaners.Best on the unique lubrication effect squeaking and stick-slip effects will be minimised. The dewatering
effect and excellent cleaning ability of ANTICORIT SYNTH SPRAY secures electrical contacts, this
means the product can be used for initial aid of engines. The product can be applied as simple cutting
oil, too. ANTICORIT SYNTH SPRAY is free of silicones, Teflon, graphite, MoS2, CFC and heavy metals.Advantages
· Stops squeaking and stick-slip effects
· Outstanding corrosion protection
· Dissolves tight or corroded connections
· Can be used as cutting oil
· Dewatering effect
· Secures electrical contacts
· Lubricating and cleaning effect
· Free of silicon, Teflon, graphite, MoS2, CFC and heavy metals - Aerosols, Coatings, Corrosion Resisting
CRC ALU High Temperature
Protective coating with aluminum look.
Resists high temperatures. Paint that resists high peak temperatures up to 600°C. Provides a hard and durable surface, which does not burn, crack or scale down, even at high temperatures.Withstands large fluctuations in temperature. Excellent weather resistance.
- Aerosols, Aerosols, Aerosols, Aerosols
CRC Torch Ceramic Anti Spatter
High-performance ceramic anti-spatter spray, providing long lasting protection against spatter build-up on the torch and welding equipment.
Benefits:
- Eliminates excessive spatter built-up on welding equipment
- Protects gas nozzles, contact tips and contact tip holders
- Prevents the adhesion of metal
- Increase tool life
- Ensures a free gas flow and free supply of the welding wire
- Only one treatment needed per shift
Applications:
- MIG/MAG Welding
- Welding robots
Characteristics:
- Leaves a dry, white and thin Ceramic protective coating
- Long lasting torch protection (±8 hours)
- Temperature resistant, up to 900ºC in air and up to 2000ºC under inert conditions
- Silicone free
- Quick Drying (±15 seconds)
- Excellent surface adhesion
- No halogenated components
- Aerosols, Coatings, Corrosion Resisting
CRC Urethane Isolation Red
Red colored one-component, urethane type coating. Urethane coating seals out water and moisture and acts as a barrier for contaminants. The coating dries fast and adheres well to most surfaces. After curing, the protective film has a high flexibility, is durable and resists abrasion and contamination.
- Aerosols, Coatings, Corrosion Resisting
CRC Zinc
Cathodic protection, even for damaged galvanized parts.
Zinc based coating with excellent adhesion to metal surfaces. The high zinc content is sacrificed during the corrosion process and so provides a galvanic protection of the treated metal. The dry coating contains a maximum amount of zinc (purity 98%), ensuring a self-healing effect when the coating gets scratched. The dry coating is matt and has an excellent surface structure to be painted.
- Aerosols, Coatings, Speciality Coatings
Loctite 3900
Henkel Loctite 3900 is a one component colorless acrylic conformal coating. Loctite 3900 Type AR, offers a quick room temperature cure, high dielectric strength, a precision spray nozzle, and contains no CFC’s or chlorinated solvents. This conformal coating is commonly used in applications with an operating range of -40 °C to 125 °C. 11 oz Aerosol.
- Aerosols, Coatings
Loctite 3900 Conformal Coating
Loctite 3900™ is a clear acrylic formulated without chlorinated solvents or CFC’s. The coating is spray-applied and air dries tack-free in five minutes to provide a tough environmental and solvent-resistant coating. The material provides protection of printed circuit boards, electronic components, thick-film circuits and other substrates. This product is typically used in applications with an operating range of -40 °C to +125 °C.
- Coatings, Composite Repair, Corrosion Resisting, Speciality Coatings, Structural Coatings, Wear Resistant
LOCTITE 7226 PNEU WEAR KT – 10KG.
LOCTITE® PC 7226 is a 2-part, grey, carbide-filled, trowelable, non-sagging, epoxy-based surface coating for protecting processing equipment from fine particle abrasion (with or without chemical attack). It is suitable for overhead and vertical surfaces. Typical applications include dredge pump liners, flumes and troughs, pump impellers, vibrating feeders, and chutes/hoppers.
- Coatings, Concrete Repair, Structural Coatings
Loctite 7320 Polypoxy PS
LOCTITE PC 7320 is a solvent-free epoxy coating designed to protect steel and concrete from environmental influences. When it has dried completely, this coating will provide exceptional levels of hardness, flexibility, resistance to impact & corrosion. This product also has good water resistance so that it can be directly applied to waterlogged environments. LOCTITE® PC 7230 PolyPoxy PS is a 2-part, grey, ceramic-filled, trowelable epoxy compound surface coating with high temperature resistance, from -30 to +230°C. The compound protects processing equipment from coarse particle abrasion by creating a sacrificial coating to preserve the structural integrity of the original substrate. Trowelable consistency makes this product a good choice for application to overhead and vertical surfaces.
- Coatings, Concrete Repair
Loctite 9626 (Deep Pour Grout)
LOCTITE® PC 9626 is a black, 2-part, thick aggregate-filled liquid epoxy system designed for grouting up to 6 in (150 mm) deep, including self-leveling applications under rails and sole plates at typical dry service temperatures of -20 °F to +225 °F (-30 °C to +105 °C). It can withstand high torque loading.
- Coatings, Composite Repair, Speciality Coatings
Loctite EA 3471
LOCTITE® EA 3471 is a 2-part, grey, non-sagging epoxy putty which is easy to apply with no need for heating or welding. Typical applications include repairing non-structural defects in castings, making jigs and fixtures, sealing vessels, tanks and valves, resurfacing worn air seals and filling cavitated areas. This product is typically used in applications with an operating range of -30 to +105°C.
- Aerosols, Aerosols, Aerosols, Coatings, Corrosion Protection, Lubricants, Rust Preventives
ANTICORIT SYNTH SPRAY
ANTICORIT SYNTH SPRAY is based on fully synthetic universal oil with mild odour and excellent penetration
properties. The product leaves a thin oily and transparent film with an outstanding corrosion protection. This film can be removed easily with low alkaline cleaners.Best on the unique lubrication effect squeaking and stick-slip effects will be minimised. The dewatering
effect and excellent cleaning ability of ANTICORIT SYNTH SPRAY secures electrical contacts, this
means the product can be used for initial aid of engines. The product can be applied as simple cutting
oil, too. ANTICORIT SYNTH SPRAY is free of silicones, Teflon, graphite, MoS2, CFC and heavy metals.Advantages
· Stops squeaking and stick-slip effects
· Outstanding corrosion protection
· Dissolves tight or corroded connections
· Can be used as cutting oil
· Dewatering effect
· Secures electrical contacts
· Lubricating and cleaning effect
· Free of silicon, Teflon, graphite, MoS2, CFC and heavy metals - Aerosols, Coatings, Corrosion Resisting
CRC ALU High Temperature
Protective coating with aluminum look.
Resists high temperatures. Paint that resists high peak temperatures up to 600°C. Provides a hard and durable surface, which does not burn, crack or scale down, even at high temperatures.Withstands large fluctuations in temperature. Excellent weather resistance.
- Aerosols, Aerosols, Aerosols, Aerosols
CRC Torch Ceramic Anti Spatter
High-performance ceramic anti-spatter spray, providing long lasting protection against spatter build-up on the torch and welding equipment.
Benefits:
- Eliminates excessive spatter built-up on welding equipment
- Protects gas nozzles, contact tips and contact tip holders
- Prevents the adhesion of metal
- Increase tool life
- Ensures a free gas flow and free supply of the welding wire
- Only one treatment needed per shift
Applications:
- MIG/MAG Welding
- Welding robots
Characteristics:
- Leaves a dry, white and thin Ceramic protective coating
- Long lasting torch protection (±8 hours)
- Temperature resistant, up to 900ºC in air and up to 2000ºC under inert conditions
- Silicone free
- Quick Drying (±15 seconds)
- Excellent surface adhesion
- No halogenated components
- Aerosols, Coatings, Corrosion Resisting
CRC Urethane Isolation Red
Red colored one-component, urethane type coating. Urethane coating seals out water and moisture and acts as a barrier for contaminants. The coating dries fast and adheres well to most surfaces. After curing, the protective film has a high flexibility, is durable and resists abrasion and contamination.
- Aerosols, Coatings, Corrosion Resisting
CRC Zinc
Cathodic protection, even for damaged galvanized parts.
Zinc based coating with excellent adhesion to metal surfaces. The high zinc content is sacrificed during the corrosion process and so provides a galvanic protection of the treated metal. The dry coating contains a maximum amount of zinc (purity 98%), ensuring a self-healing effect when the coating gets scratched. The dry coating is matt and has an excellent surface structure to be painted.
- Aerosols, Coatings, Speciality Coatings
Loctite 3900
Henkel Loctite 3900 is a one component colorless acrylic conformal coating. Loctite 3900 Type AR, offers a quick room temperature cure, high dielectric strength, a precision spray nozzle, and contains no CFC’s or chlorinated solvents. This conformal coating is commonly used in applications with an operating range of -40 °C to 125 °C. 11 oz Aerosol.
- Aerosols, Coatings
Loctite 3900 Conformal Coating
Loctite 3900™ is a clear acrylic formulated without chlorinated solvents or CFC’s. The coating is spray-applied and air dries tack-free in five minutes to provide a tough environmental and solvent-resistant coating. The material provides protection of printed circuit boards, electronic components, thick-film circuits and other substrates. This product is typically used in applications with an operating range of -40 °C to +125 °C.
- Coatings, Composite Repair, Corrosion Resisting, Speciality Coatings, Structural Coatings, Wear Resistant
LOCTITE 7226 PNEU WEAR KT – 10KG.
LOCTITE® PC 7226 is a 2-part, grey, carbide-filled, trowelable, non-sagging, epoxy-based surface coating for protecting processing equipment from fine particle abrasion (with or without chemical attack). It is suitable for overhead and vertical surfaces. Typical applications include dredge pump liners, flumes and troughs, pump impellers, vibrating feeders, and chutes/hoppers.
- Coatings, Concrete Repair, Structural Coatings
Loctite 7320 Polypoxy PS
LOCTITE PC 7320 is a solvent-free epoxy coating designed to protect steel and concrete from environmental influences. When it has dried completely, this coating will provide exceptional levels of hardness, flexibility, resistance to impact & corrosion. This product also has good water resistance so that it can be directly applied to waterlogged environments. LOCTITE® PC 7230 PolyPoxy PS is a 2-part, grey, ceramic-filled, trowelable epoxy compound surface coating with high temperature resistance, from -30 to +230°C. The compound protects processing equipment from coarse particle abrasion by creating a sacrificial coating to preserve the structural integrity of the original substrate. Trowelable consistency makes this product a good choice for application to overhead and vertical surfaces.
- Coatings, Concrete Repair
Loctite 9626 (Deep Pour Grout)
LOCTITE® PC 9626 is a black, 2-part, thick aggregate-filled liquid epoxy system designed for grouting up to 6 in (150 mm) deep, including self-leveling applications under rails and sole plates at typical dry service temperatures of -20 °F to +225 °F (-30 °C to +105 °C). It can withstand high torque loading.
- Coatings, Composite Repair, Speciality Coatings
Loctite EA 3471
LOCTITE® EA 3471 is a 2-part, grey, non-sagging epoxy putty which is easy to apply with no need for heating or welding. Typical applications include repairing non-structural defects in castings, making jigs and fixtures, sealing vessels, tanks and valves, resurfacing worn air seals and filling cavitated areas. This product is typically used in applications with an operating range of -30 to +105°C.