Prevent leak – air, hydraulic, pipe joints
Threadsealing
Showing 1–15 of 17 results
- Adhesive, Threadsealing
LOCTITE 516 (10Kg)
LOCTITE® 516™ is a high viscosity, non-toxic, thixotropic, preapplied, water-based thread sealant for automatic dispensing applications. When dried, it becomes a resilient, tight clinging, non-curing sealant for tapered or straight threads. LOCTITE® 516™ provides positive sealing and resistence to vibrational loosening. The thread-filling ability and prevailing torque characteristics of this product are effective for use on sealing applications, particularly where re-adjustments are required, e.g. rear axle filler plugs, bearing adjuster nuts, pressure gauges and sensors, brake fittings, pipe fittings, and compressor pipe plugs. Other devices that this product is designed for includes; cable connectors, screws for plastic assemblies, adjustment screws, overhead fire sprinklers, shower heads, and door closure hardware. This product is typically used in applications with an operating range of -54 °C to +150 °C.
- Threadsealing
LOCTITE 542 MINI 0.5ML
LOCTITE® 542 is designed for the locking and sealing of metal pipes and fittings as well as other cylindrical metal assemblies. The product cures when confined in the absence of air between close-fitting metal surfaces and prevents loosening and leakage due to shock and vibration. The thixotropic nature of LOCTITE 542 reduces the migration of liquid product after application to the part.
- Adhesive, Threadsealing
Loctite 565 (50ml)
LOCTITE® 565 is a white to off-white, 1-part, low strength, high viscosity, anaerobically-cured, methacrylate ester, acrylic thread sealant designed for the locking and sealing of metal pipes and fittings. The product cures when confined in the absence of air between close fitting metal surfaces and prevents loosening and leakage from shock and vibration.
- Adhesive, Threadsealing
Loctite 567 (250ml)
LOCTITE® 567 is an off-white, low strength, thixotropic methacrylate thread sealant. It cures in the absence of air and by contact with metals when confined within threads up to M80/R3”. It is best suited for use on coarse metal threads and its breakaway torque rating is 1.7Nm. Viscosity is 280,000 – 800,000 mPa·s and service temperature -55 to +150ºC. UL approved.
- Adhesive, Threadsealing
Loctite 567 (50ml)
LOCTITE® 567 is an off-white, low strength, thixotropic methacrylate thread sealant. It cures in the absence of air and by contact with metals when confined within threads up to M80/R3”. It is best suited for use on coarse metal threads and its breakaway torque rating is 1.7Nm. Viscosity is 280,000 – 800,000 mPa·s and service temperature -55 to +150ºC. UL approved.
- Threadsealing
LOCTITE 572 TTL 50ML
LOCTITE® 572 is a white to off-white, medium strength, methacrylate-based thread sealant for metal pipes and fittings. Suitable for coarse threads, it offers a breakaway torque of 7 Nm. Slow curing attributes allow users to adjust the alignment of fittings. Suitable for thread sizes up to M80, it is thixotropic to reduce migration after application.
- Adhesive, Threadsealing
Loctite 5770 (50ml)
LOCTITE® 5770 is an off-white to purplish gray dimethacrylate ester acrylic sealant paste designed for locking and sealing metal threaded pipes and fittings in industrial applications. It prevents loosening and leakage from shock and vibration and is particularly suitable for sealing steel metal joints where high temperature and high pressure resistance is required.
- Adhesive, Threadsealing
Loctite 962 (1L)
LOCTITE® 962™ is designed for sealing core plugs but is also applicable to many other high strength sealing applications where non-migration is desired. Typical applications include sealing and securing cylindrical metal assemblies, e.g. engine block cup and core plugs, water pump seals, and hub and shaft assemblies. The thixotropic nature of LOCTITE® 962™ reduces the migration of liquid product after application to the substrate.
- Adhesive, Threadsealing
LOCTITE 516 (10Kg)
LOCTITE® 516™ is a high viscosity, non-toxic, thixotropic, preapplied, water-based thread sealant for automatic dispensing applications. When dried, it becomes a resilient, tight clinging, non-curing sealant for tapered or straight threads. LOCTITE® 516™ provides positive sealing and resistence to vibrational loosening. The thread-filling ability and prevailing torque characteristics of this product are effective for use on sealing applications, particularly where re-adjustments are required, e.g. rear axle filler plugs, bearing adjuster nuts, pressure gauges and sensors, brake fittings, pipe fittings, and compressor pipe plugs. Other devices that this product is designed for includes; cable connectors, screws for plastic assemblies, adjustment screws, overhead fire sprinklers, shower heads, and door closure hardware. This product is typically used in applications with an operating range of -54 °C to +150 °C.
- Threadsealing
LOCTITE 542 MINI 0.5ML
LOCTITE® 542 is designed for the locking and sealing of metal pipes and fittings as well as other cylindrical metal assemblies. The product cures when confined in the absence of air between close-fitting metal surfaces and prevents loosening and leakage due to shock and vibration. The thixotropic nature of LOCTITE 542 reduces the migration of liquid product after application to the part.
- Adhesive, Threadsealing
Loctite 565 (50ml)
LOCTITE® 565 is a white to off-white, 1-part, low strength, high viscosity, anaerobically-cured, methacrylate ester, acrylic thread sealant designed for the locking and sealing of metal pipes and fittings. The product cures when confined in the absence of air between close fitting metal surfaces and prevents loosening and leakage from shock and vibration.
- Adhesive, Threadsealing
Loctite 567 (250ml)
LOCTITE® 567 is an off-white, low strength, thixotropic methacrylate thread sealant. It cures in the absence of air and by contact with metals when confined within threads up to M80/R3”. It is best suited for use on coarse metal threads and its breakaway torque rating is 1.7Nm. Viscosity is 280,000 – 800,000 mPa·s and service temperature -55 to +150ºC. UL approved.
- Adhesive, Threadsealing
Loctite 567 (50ml)
LOCTITE® 567 is an off-white, low strength, thixotropic methacrylate thread sealant. It cures in the absence of air and by contact with metals when confined within threads up to M80/R3”. It is best suited for use on coarse metal threads and its breakaway torque rating is 1.7Nm. Viscosity is 280,000 – 800,000 mPa·s and service temperature -55 to +150ºC. UL approved.
- Threadsealing
LOCTITE 572 TTL 50ML
LOCTITE® 572 is a white to off-white, medium strength, methacrylate-based thread sealant for metal pipes and fittings. Suitable for coarse threads, it offers a breakaway torque of 7 Nm. Slow curing attributes allow users to adjust the alignment of fittings. Suitable for thread sizes up to M80, it is thixotropic to reduce migration after application.
- Adhesive, Threadsealing
Loctite 5770 (50ml)
LOCTITE® 5770 is an off-white to purplish gray dimethacrylate ester acrylic sealant paste designed for locking and sealing metal threaded pipes and fittings in industrial applications. It prevents loosening and leakage from shock and vibration and is particularly suitable for sealing steel metal joints where high temperature and high pressure resistance is required.
- Adhesive, Threadsealing
Loctite 962 (1L)
LOCTITE® 962™ is designed for sealing core plugs but is also applicable to many other high strength sealing applications where non-migration is desired. Typical applications include sealing and securing cylindrical metal assemblies, e.g. engine block cup and core plugs, water pump seals, and hub and shaft assemblies. The thixotropic nature of LOCTITE® 962™ reduces the migration of liquid product after application to the substrate.
- Adhesive, Threadsealing
LOCTITE 516 (10Kg)
LOCTITE® 516™ is a high viscosity, non-toxic, thixotropic, preapplied, water-based thread sealant for automatic dispensing applications. When dried, it becomes a resilient, tight clinging, non-curing sealant for tapered or straight threads. LOCTITE® 516™ provides positive sealing and resistence to vibrational loosening. The thread-filling ability and prevailing torque characteristics of this product are effective for use on sealing applications, particularly where re-adjustments are required, e.g. rear axle filler plugs, bearing adjuster nuts, pressure gauges and sensors, brake fittings, pipe fittings, and compressor pipe plugs. Other devices that this product is designed for includes; cable connectors, screws for plastic assemblies, adjustment screws, overhead fire sprinklers, shower heads, and door closure hardware. This product is typically used in applications with an operating range of -54 °C to +150 °C.
- Threadsealing
LOCTITE 542 MINI 0.5ML
LOCTITE® 542 is designed for the locking and sealing of metal pipes and fittings as well as other cylindrical metal assemblies. The product cures when confined in the absence of air between close-fitting metal surfaces and prevents loosening and leakage due to shock and vibration. The thixotropic nature of LOCTITE 542 reduces the migration of liquid product after application to the part.
- Adhesive, Threadsealing
Loctite 565 (50ml)
LOCTITE® 565 is a white to off-white, 1-part, low strength, high viscosity, anaerobically-cured, methacrylate ester, acrylic thread sealant designed for the locking and sealing of metal pipes and fittings. The product cures when confined in the absence of air between close fitting metal surfaces and prevents loosening and leakage from shock and vibration.
- Adhesive, Threadsealing
Loctite 567 (250ml)
LOCTITE® 567 is an off-white, low strength, thixotropic methacrylate thread sealant. It cures in the absence of air and by contact with metals when confined within threads up to M80/R3”. It is best suited for use on coarse metal threads and its breakaway torque rating is 1.7Nm. Viscosity is 280,000 – 800,000 mPa·s and service temperature -55 to +150ºC. UL approved.
- Adhesive, Threadsealing
Loctite 567 (50ml)
LOCTITE® 567 is an off-white, low strength, thixotropic methacrylate thread sealant. It cures in the absence of air and by contact with metals when confined within threads up to M80/R3”. It is best suited for use on coarse metal threads and its breakaway torque rating is 1.7Nm. Viscosity is 280,000 – 800,000 mPa·s and service temperature -55 to +150ºC. UL approved.
- Threadsealing
LOCTITE 572 TTL 50ML
LOCTITE® 572 is a white to off-white, medium strength, methacrylate-based thread sealant for metal pipes and fittings. Suitable for coarse threads, it offers a breakaway torque of 7 Nm. Slow curing attributes allow users to adjust the alignment of fittings. Suitable for thread sizes up to M80, it is thixotropic to reduce migration after application.
- Adhesive, Threadsealing
Loctite 5770 (50ml)
LOCTITE® 5770 is an off-white to purplish gray dimethacrylate ester acrylic sealant paste designed for locking and sealing metal threaded pipes and fittings in industrial applications. It prevents loosening and leakage from shock and vibration and is particularly suitable for sealing steel metal joints where high temperature and high pressure resistance is required.
- Adhesive, Threadsealing
Loctite 962 (1L)
LOCTITE® 962™ is designed for sealing core plugs but is also applicable to many other high strength sealing applications where non-migration is desired. Typical applications include sealing and securing cylindrical metal assemblies, e.g. engine block cup and core plugs, water pump seals, and hub and shaft assemblies. The thixotropic nature of LOCTITE® 962™ reduces the migration of liquid product after application to the substrate.